Using Additional Handsets; Registering An Additional Handset - BT BT7600 Quick Setup And User Manual

Using additional handsets

74
You can register up to five GAP
compliant handsets to your
BT7600 base to extend your
phone system without needing
to install telephone extension
sockets for each new phone.
If a handset becomes
un-registered it will need to be
registered to the base again.
Please register this handset will
be displayed, select
follow the instructions starting
from point 4 below.
You have 2 minutes to complete
the registration process. After 2
minutes the In use light on the
base will stop flashing.
If registration isn't successful
the first time, please try again
incase the base registration
period ran out of time.
If there are already five
handsets registered to the
base, the registration will fail.
You must de-register another
handset before you can register
the new one.
If you've bought a BT7600 multiple pack, any
additional handsets come pre-registered to the
base. However, if you purchase an additional
handset separately, you must register it to your
BT7600 base before it can be used.
Register an additional handset
1. Select Menu, scroll
press OK.
then
OK
2. Press
3. Register is highlighted, press OK.
4. Press and hold Find button on base is displayed.
5. Press and hold
beep and the In use light starts to flash.
6. Immediately, select OK on the handset. The handset
will display Registering handset to indicate the
base is in registration mode. If the system PIN is not
0000 then you will be prompted to enter it, then
select OK.
7. Once registration is successful the handset will show
Handset x registered (with X being the assigned
handset number). The handset will then synchronise
data with any other registered handsets, e.g. contacts,
speed dials, handset names and text messages.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
to display Settings and
to highlight Registration and press OK.
on the base until you hear a