Block Nuisance Calls - BT BT7600 Quick Setup And User Manual

28 Call control settings
Please note, other products
connected to the line are not
compatible with this feature
and will still ring.
For more information and
general advice on handling
unwanted calls please go to
bt.com/unwantedcalls
You must subscribe to a Caller
Display service from your
network provider for the block
nuisance calls feature to work.
Charges may apply.
will be displayed with no
Blocked
backlight on the handset when
a blocked call is received. The
handset or base will not ring.
3. Do not disturb is highlighted, press OK.
4. Press
select Timed you need to select the on and off times
you want, press
highlight whether you want VIP calls to be Allowed
or Not Allowed using
chosen setting will be displayed and you will hear a
confirmation tone.

Block nuisance calls

The BT7600 blocks nuisance calls in two ways,
firstly by type e.g withheld or international and also
by your choice of specific numbers (you can store
up to 10 numbers of your own choice).
1. Select Menu, scroll
select Options.
2. Enter the access PIN and select
displayed, press OK.
3. Press
You now have 2 choices:
i) To block calls by type, when By call type is
highlighted, press OK. You can now select Blocked
or Allowed for each of the call types by highlighting
each one:
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
or to select On, Off or Timed. If you
and enter the on time, then
again and enter the off time. Press
to highlight Block calls and press OK.
or , then press Save. The
to Call control and
. Incoming calls is
to