Message Playback Using The Base - BT BT7600 Quick Setup And User Manual

Message playback using the base

Press . If you have messages they will be
played, new (unplayed) messages first followed by
old (played) messages.
During playback:
Press to stop playback. The base will return
to idle.
Press to delete the message being played.
Press to skip forward to the start of the
next message.
Press to skip back to the start of the
current message.
Press twice to skip back to the start of the
previous message.
Press to increase or decrease the
playback volume level.
At the end of playback the base will return to idle
mode and messages will be renumbered to take into
account any deleted messages.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Answer machine
Memory full
If there is only 10 seconds of
memory capacity left when a
caller is leaving a message they
will hear, "Please complete your
message within 10 seconds." If
a caller is still leaving a message
when the memory expires they
will hear, "Memory full. Thank
you for calling", and the call will
be ended.
If your answer machine
memory becomes full and it is
set to Answer and record it will
automatically switch to Answer
only mode. Once messages
have been deleted and there
is memory available again, the
machine will revert to Answer
and record mode (unless
you have changed the mode
yourself to Answer only using
the handset menu).
You will need to delete
messages before your answer
machine will be able to record
new ones. To delete old (played)
messages, see page 49 and 52.
51