Table of Contents
Advertisement
The evenly spaced green bars represent video that was recorded based on the time lapse setting. (See
Storage
Setup)
Video Timeline
Just above the Camera Selection List and the Recorded Video Bars, you'll find the Video Time Line.
The system will automatically display a two-hour timeline in 30 minute increments.
You can adjust the search time by clicking the left or right arrows or by typing a new start time in the
Start Time field and clicking the Search button.
In addition to 30 minute increments (shown above), the Video Timeline can be displayed in increments
of five minutes (A), as well as one (B), two (C), or 24 hours (D).
A.
B.
C.
D.
You can adjust the time increments by using the Zoom buttons. Click the (-) button once to change the
display to shorter increments. Click the (+) button to display longer increments.
The yellow Video Cursor is used to select a segment of recorded video.
Video Playback
To select a camera for video playback, click on a camera name in the search results area. To select
multiple cameras for playback, press and hold the Control key and then click each of the camera
names. To select a range of consecutive cameras, press and hold the Shift key, click the first camera
name in the range, and then click the final camera name in the range.
To play back a segment of video from all selected cameras simultaneously, move your mouse cursor
along the Recorded Video Bar until you reach the time of the video you want to play back. Clicking once
will change the location of the Video Cursor. Double clicking or pressing the play button will begin the
playback of all the cameras included in the search in the Video Playback window at the top-center of
the Search screen. The date, time (milliseconds), or camera names are displayed in the Video
Playback windows depending on the configurations in
58
Camera
Setup.
Hybrid Digital Video Recorder
Advertisement
Table of Contents
