Sending A Trunk Flash - Siemens HiPath 2000 User Manual

Enhanced phone functions
Step by Step
g
M2050Calls
M0097Trunk flash
70

Sending a trunk flash

To activate ISDN-type services and features through the
network carrier's analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Prerequisite: You have set up an external connection.
N
Open the Program/Service menu
Select and confirm the option shown.
Select and confirm the option shown
j
Enter the service code and/or telephone number.
[1] "Differing display view in a HiPath 4000 environment"
page 31.
[1]
.
page 136