Forwarding Calls On Trunks - Siemens HiPath 2000 User Manual

Step by Step
M0251Forward Line: On
M00581=all calls
M00592=external calls only
M00603=internal calls only
M0047Save
Making calls in the team/executive/secretary configuration

Forwarding calls on trunks

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Activating call forwarding for one trunk activates the
function for all trunk keys assigned to this trunk in your
group.
N
Open the Program/Service menu
Select and confirm the option shown.
or
S
If available, press the "K1952CFW MULAP" key.
(You have programmed a key with the incomplete
"K1952CFW MULAP" function, excluding the call for-
warding type and destination
S
Press the required trunk key.
or
j
Enter the required trunk number.
Select and confirm the option shown
or
select and confirm the option shown
or
select and confirm the option shown.
j
Enter the destination number.
Confirm.
or
S
If available, press the "K1952CFW MULAP" key. (You
have programmed the "K1952CFW MULAP" key with
the call forwarding type and destination,
page 31.
page 73.)
page 73.)
115