York CZE02411 Technical Manual

TECHNICAL GUIDE
AFFINITY
R-410A SPLIT-SYSTEM AIR CONDITIONERS
15 SEER
MODELS:
CZE024THRU 060
(2 THRU 5 NOMINAL TONS)
LISTED
Due to continuous product improvement, specifications are
subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ahridirectory.org
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The
air conditioning system. It is designed to be custom matched with
one of our complete line of evaporator sections, each designed to
serve a specific function. Matching air handlers are available for
upflow, downflow, and horizontal left or right application to provide a
complete system. Electric heaters are available if required. Add-on
coils are available for use with upflow, downflow, or horizontal fur-
naces. Field installed accessories are available as needed.
WARRANTY
5-year limited parts warranty.
10-year limited compressor warranty.
Premium System Warranty - Limited lifetime compressor and 10-
year parts when matched with an approved
UPG air handler and coil.
FEATURES
• Superior Coil Protection – A
• Isolated Compressor Compartment – A molded composite
• Protected Compressors – Each compressor is protected
• Environmentally Friendly Refrigerant – Next generation
• Durable Finish – Automotive quality finish provides the ultimate
• Lower Installed Cost – Designed to provide enhanced install-
• Low Operating Sound Levels – A fan design boasting technol-
ISO 9001
• Filter-Drier – A factory installed, solid core liquid line filter-drier
Certified Quality
Management System
• Easy Service Access – A full end, full service, access panel
• Composite Base - Strong and durable composite base pan
•
• Low RPM fan motor - Helps to reduce airflow noise.
• Agency Listed - U.L. and C.U.L. listed - approved for outdoor
CZE
Series condensing unit is the outdoor part of a versatile
guard completely protects coil from debris and other large dam-
aging material while a polymer mesh further protects the coil
against smaller particles.
bulkhead isolates the compressor from the rest of the unit reduc-
ing sound and vibration.
against abnormal pressures by an internal pressure relief valve
and factory installed high and low pressure controls. Additional
protection against moisture and debris is provided by factory
installed liquid line filter driers.
refrigerant R-410A delivers environmentally friendly perfor-
mance with zero ozone depletion.
protection from harmful U.V. rays and rust creep ensuring long-
lasting high quality appearance. A powder-paint topcoat is
applied over a baked-on primer, using a galvanized, zinc coated
steel base material. The result is a finish that has been proven in
testing to provide 33% greater durability than conventional pow-
der-coat finishes.
ability by featuring a slide-down control compartment and angled
service valves to reduce overall installation time and cost.
ogy adapted from aeronautic and defense engineering provides
for whisper quiet operation by allowing airflow to flow smoothly
and efficiently across the fan tips.
filters harmful debris and moisture from the system.
with handle makes for easy entry to internal components.
resists rust and corrosion while it helps reduce vibrations and
noise.
Quiet drive system - Features combination of swept-wing fan,
composite base pan, isolated compressor compartment and
two-stage compressor to reduce overall sound to a mere whis-
per.
application. The unit is certified in accordance with the Unitary
Small Equipment cerification program, which is based on ARI
Standard 210/240.
246747-YTG-L-0808
York Affinity
furnace or
stamped decorative metal coil