Wall Mount Installation; Standard Wall Plate Mounting - Inter-Tel INT3000 User Manual

W M
ALL OUNT
Your INT3000 endpoint can be wall-mounted as explained in the following pages.

Standard Wall Plate Mounting

The INT3000 is designed to be mounted on a standard wall plate. To attach the wall
mount stand to the Base Unit:
Slide the Wall Mount stand into the notches at
1.
the top of the Base Unit, rotate the Wall Mount
stand down and snap it into place, as shown on
the right.
Plug the AC Adapter into the Base Unit as pre-
2.
viously described.
Place the AC Adapter cord inside the molded
3.
channel of the Wall Mount stand, as shown on
the right.
Plug one end of the telephone cord into the
4.
LINE jack on the Base Unit. Then place the
telephone cord inside the molded channel on the
bottom of the Wall Mount stand.
Plug the other end of the telephone cord into the
5.
modular wall jack.
Place the Base Unit on the posts of the wall
6.
plate and push down until it's firmly seated, as
shown on the right.
Plug the AC Adapter into a standard 120V AC
7.
wall outlet.
NOTE:
Do not use an outlet controlled by a wall
switch.
12
I
NSTALLATION
®
Inter-Tel INT3000 User Guide