Hardware Reset - Vivotek FE8191 User Manual

VIVOTEK
DI/DO Diagram
Please refer to the following illustration for the connection method.
GND
Camera Power
Input
Output
BJT transistor

Hardware Reset

The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, press the reset button longer to restore the factory settings and install again.
Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the
Network Camera to reboot.
Restore: Press and hold the recessed reset button for at least several seconds to restore. Note
that all settings will be restored to factory defaults.
Micro SD/SDHC/SDXC Card Capacity
This network camera is compliant with Micro SD/SDHC/SDXC 32GB, 64GB, and other
preceding standard SD cards.
10 - User's Manual
VDC
Switch +12
VDC
Max.
Relay
GND
Camera Power
Input
Output
BJT transistor
VDC
+12
VDC
Switch
Relay