Dvd Settings And Adjustments; Audio Setup - Sony SLV-D910AZ Service Manual

B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS∗ decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
.
B-2
∗ "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-VCR
B-1
Stereo audio cord
(red)
(supplied)
R
AUDIO
L
(white)
VIDEO
to OUT AUDIO L/R Optical digital cord
(not supplied)
Remove jack cap
before connecting
l: Signal flow
(white) (red)
to audio input
[Speakers]
AV amplifier (receiver) having
a decoder
Rear (L) Subwoofer
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "Oui" in "OPTIONS AUDIO" menu (page 62). If your AV amplifier (receiver)
has an MPEG audio decoder function, set "MPEG" to "MPEG" in "OPTIONS AUDIO"
menu (page 62). Otherwise, no sound or a loud noise will come from the speakers.
60
A/V Receiver hookup

DVD Settings and Adjustments

Audio Setup

"Options Audio" allows you to set the sound
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
SET UP
mode, then press V/v to select
and press ENTER.
ENTER
2
Press V/v to select "Options Audio", then
press ENTER.
ENTER
3
Press V/v to select the setup item from the displayed list:
"Dolby Digital", "MPEG", "DTS", "Audio DRC", or "48kHz/96kHz
ENTER PCM".
62
Audio Setup
and
B-1
to DIGITAL AUDIO OUT
B-2
(COAXIAL or OPTICAL)
DIGITAL AUDIO OUT
COAXIAL
OPTICAL
and or
Coaxial digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
Front (L) Centre
Front (R)
SET UP
V/v/B/b
ENTER
REGLAGE DU DVD
(DVD)
Réglage de la langue
Options Audio
Réglage de L'écran
Cont. Parental
V v ENTER RETURN SET UP
OPTIONS AUDIO
Dolby Digital [ D-PCM ]
MPEG [ PCM ]
DTS [ Non ]
Audio DRC [ Standard ]
48kHz/96kHz PCM [ 48kHz/16bit ]
V v B b RETURN SET UP
S-Video hookup
Make audio connections using the OUT AUDIO L/R jacks or DIGITAL AUDIO OUT
(OPTICAL or COAXIAL) jacks when you use S-VIDEO hookup.
Use this hookup if your TV has an S VIDEO input jack
• Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
DVD-VCR
or
Coaxial
Audio cord
digital cord
(supplied)
(not supplied)
to audio
input
TV or AV amplifier
Notes
• Set "DVD S-Video Out" to "Oui" in the "REGLAGE DE L'ECLAN" menu (page 65) to view
pictures from the S-VIDEO jack.
• The connection using S-VIDEO OUT jack is only for the DVD player.
4
Press B/b to select an item.
ENTER
5
Press SET UP to exit the menu.
SET UP
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Dolby Digital
• MPEG
Selects the type of MPEG audio signal.
The default setting is indicated in bold print.
PCM
MPEG
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Non
Oui
1-14
TV
l : Signal flow
(DVD only)
INPUT
S VIDEO
or
Optical digital
cord (not
S VIDEO cord
supplied)
(not supplied)
Remove jack
cap before
connecting
to coaxial or optical
digital input
S-Video hookup
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
lacking a built-in MPEG decoder. If you play MPEG audio sound
tracks, the player outputs stereo signals via the DIGITAL AUDIO
OUT (OPTICAL or COAXIAL) jack.
Select this when the player is connected to an audio component
with a built-in MPEG decoder.
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
Select this when the player is connected to an audio component
with a built-in DTS decoder.
continued
Audio Setup
61
63