Dvd Settings And Adjustments; Audio Setup; Screen Setup - Sony SLV-D350P Service Manual

QQ
3 7 63 1515 0

DVD Settings and Adjustments

Audio Setup

"Audio Setup" allows you to set the sound
according to the playback and connection
conditions.
1 Press SET UP when the DVD player is in stop
mode, then press V/v to select
then press ENTER.
2 Press V/v to select "Audio Setup," then press
ENTER.
3
Press V/v to select the setup item from the displayed list:
"Dolby Digital," "DTS" or "Audio DRC."
TE
L 13942296513

Screen Setup

"Screen Setup" allows you to set the screen
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
mode, then press V/v to select
then press ENTER.
2 Press V/v to select "Screen Setup," then press
ENTER.
www
3 Press V/v to select the setup item from the displayed list:
"TV Type," or "Black Level."
To set the "Progressive" setting, see page 69.
.
http://www.xiaoyu163.com
SET UP
V/v/B/b
ENTER
DVD SETUP
(DVD),
Language Setup
Audio Setup
Screen Setup
Parental Setup:
V v ENTER RETURN SET UP
AUDIO SETUP
Dolby Digital [ D-PCM ]
DTS [ Off ]
Audio DRC [ Wide Range ]
V v B b RETURN SET UP
continued
Audio Setup
SET UP
V/v/B/b
ENTER
O RETURN
DVD SETUP
(DVD),
Language Setup
Audio Setup
Screen Setup
Parental Setup:
V v ENTER RETURN SET UP
SCREEN SETUP
TV Type [ 4:3 Letter Box ]
Black Level [ Off ]
Progressive [ Off ]
V v B b RETURN SET UP
x ao u163
y
i
continued
Screen Setup
http://www.xiaoyu163.com
2 9
8
4
5
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Dolby Digital
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off
On
• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC." This affects the output from the following jacks:
– LINE OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby
Digital" is set to "D-PCM".
The default setting is indicated in bold print.
Wide Range
TV Mode
Notes
• If you select the surround setting while playing a DVD, the player does not output Dolby
Digital signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you
set "Dolby Digital" to "D-PCM" in "AUDIO SETUP" menu).
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
• Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.
• If you set "DTS" to "On," you cannot select surround setting (page 87).
Q Q
3 6 7 1 3 1 5
66
65 Audio Setup
4
5
Menu choices
• TV Type
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
4:3 Letter Box
4:3 Pan Scan
16:9
4:3 Letter Box
• Black Level
You can enhance the black level by increasing the brightness and contrast when
viewing DVDs with the PROGRESSIVE indicator turned off.
The default setting is indicated in bold print.
Off
On
Notes
• Playback settings stored in the disc take priority over the "DVD SETUP" menu settings and
not all the functions described may work.
• Depending on the DVD, "4:3 Letter Box" may be selected automatically instead of "4:3 Pan
Scan" or vice versa.
co
.
68
67 Screen Setup
1-15
9 4 2 8
Press B/b to select an item.
Press SET UP to exit the menu.
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
Select this when the player is connected to an audio component
with a built-in DTS decoder.
Gives you the feeling of being at alive performance.
Makes the low sounds clear even if you turn the volume down.
0 5 8 2 9 9 4 2 8
Press B/b to select an item.
Press SET UP to exit the menu.
Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
Select this when you connect a 4:3 screen TV. Automatically
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
Select this when you connect a wide-screen TV or a TV with a wide
mode function.
4:3 Pan Scan 16:9
Stops the increase of the contrast.
Increases the contrast.
m
9 9
9 9