Basic Operations; Playing Discs - Sony SLV-D940P AZ Service Manual

4
Press V/v to select the row which you want to
change or enter the station name, then press b.
ENTER
To display other pages for programme
positions 6 to 80, press v/V repeatedly.
5
Press V/v to select "NAME," then press b.
ENTER
6
Enter the station name.
1 Press V/v to select a character.
ENTER
Each time you press V, the character
changes as shown below.
A t B t ... t Z t 0 t 1 t ... t 9
t A
2 Press b to set the next character.
The next space flashes.
To correct a character, press B/b until the character you want to correct
flashes, then reset it.
You can set up to 4 characters for the station name.
7
Press ENTER to confirm the new name.
ENTER
8 Press O RETURN, then press SET UP to exit the menu.
RETURN
SET UP
28
Presetting channels
2 Press H.
The disc tray closes and the DVD player starts playback.
The display window shows the
playback time.*
Depending on the disc, a menu
may appear on the TV screen.
For DVDs, see page 70. For
VIDEO CDs, see page 92.
* "– – – – –" appears when no disc
is loaded.
Additional tasks
To
Stop play
Pause play*
1
Resume play after pause
Go to the next frame in pause mode
Go to the previous frame in pause
mode
Go to the next chapter, track, or scene
in continuous play mode
Go back to the previous chapter, track,
or scene in continuous play mode
Replay the previous scene for 10
seconds in continuous play mode*
2
(Instant Replay)
Briefly fast forward the current scene
for 30 seconds in continuous play
mode* 2 * 3
(Instant Advance)
Stop play and remove the disc
* 1 If you pause the DVD player for more than 5 minutes, the DVD player will automatically
stop.
* 2 For DVD VIDEOs and the DVD-RWs/DVD-Rs or DVD+RWs/DVD+Rs only
* 3 You can press SKIP up to 4 times. This allows you to fast forward up to 2 minutes in
total.
Tips
• The Instant Replay function is useful when you want to review a scene or dialogue that you
missed.
• The Instant Advance function is useful when you want to pass over a scene that you don't
want to watch.
30

Playing discs

MANUAL TUNING
SYSTEM : B/G
PR : 5
CH : 033
MFT : –
NAME : – – – –
v V b B MEMORY : ENTER
RETURN
MANUAL TUNING
SYSTEM : B/G
PR : 5
CH : 033
MFT : –
NAME : – – – –
v V b B
MEMORY : ENTER
RETURN
MANUAL TUNING
SYSTEM : B/G
PR : 5
CH : 033
MFT : –
NAME : O – – –
v V b B
MEMORY : ENTER
RETURN
Hour Minute Second
Press
x
X
H
SKIP
REPLAY
> NEXT on the remote or M on the unit
. PREV on the remote or m on the unit
REPLAY
SKIP
Z

Basic Operations

Playing discs
Depending on the disc, some operations may
be different or restricted. Refer to the
operating instructions supplied with your
disc.
Before you start...
• Turn on the DVD-VCR and your TV.
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT DVD to control the
DVD player (page 9).
1 Press Z to open the disc tray and
place a disc on the disc tray.
Notes
• You may not be able to use the Instant Replay or Instant Advance function with some scenes.
• Switching between original (ORG) and play list (PL) within a disc recorded in VR mode is
possible only while the disc is stopped. Press TOP MENU to switch between ORG and PL.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing ?/1.
1 While playing a disc, press x to stop playback.
2 Press H.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
Tip
• To begin playback from the top of the disc, press x twice then press H.
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode
Press m or M on the remote (or hold down m or M on the unit).
Each time you press the button, the playback speed changes as follows.
• DVD:
PLAY t FF1/FR1 t FF2/FR2 t FF3/FR3 t FF4/FR4 t FF5/FR5 t
FF6/FR6
• CD, MP3 and VIDEO CD:
PLAY t FF1/FR1 t FF2/FR2 t FF3/FR3
When you find the point you want, press H.
Note
• The fast reverse operation may not be possible for CD, MP3 and VIDEO CD depending on
the recording method.
To watch slow motion in continuous play mode (DVD and VIDEO CD
only)
Press X, then press
cyclically as follows.
* You can not watch reverse slow motion with DVD-RW in VR mode. Reverse slow motion
playback also may not be possible for some VIDEO CDs depending on the recording
method.
To resume normal playback, press H.
Tip
• To make a video timer reservation during DVD playback, we recommend performing the
operations under "Quick Timer Recording" (page 94).
1-6
?/1
Z
/
m/M y
./>
X
x
H
with the playback side
facing down
continued
Playing discs
y
or . With each press, the playback speed changes
continued
Playing discs
29
31