Toshiba TECRA A10 Satellite Pro S300 Series User Manual page 39

Starting Hibernation Mode
You can also enable Hibernation Mode by pressing FN + F4 - please refer
to Chapter 5,
To enter Hibernation Mode, follow the steps below.
1. Click Start.
2. Click the arrow button (
Automatic Hibernation Mode
The computer can be configured to enter Hibernation Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:
1. Click Start and click the Control Panel.
2. Click System and Maintenance and click Power Options.
3. Click Choose what the power button does or Choose what closing
4. Enable the desired Hibernation Mode settings for When I press the
5. Click the Save changes button.
Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer will take a
moment to save the current data in memory to the hard disk drive. During
this time, the Hard Disk Drive indicator will glow.
After you turn off the computer, and the content of memory has been saved
to the hard disk drive, turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
Downloaded from LpManual.com Manuals
User's Manual
The Keyboard, for further details.
(
the lid does.
power button and When I close the lid.
) in the power management buttons
) and select Hibernate from the menu.
Getting Started
1-11