Turning On The Power; Starting Up For The First Time; Turning Off The Power; Shut Down Mode - Toshiba TECRA A10 Satellite Pro S300 Series User Manual

Turning on the power

This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the
section in Chapter 6, Power and Power-Up Modes for more information.
■
■
1. Open the display panel.
2. Press and hold the computer's power button for two or three seconds.

Starting up for the first time

The Microsoft Windows Vista Startup Screen will be the first screen
displayed when you turn on the power. Follow the on-screen instructions on
each screen in order to properly install the operating system.
When it is displayed, be sure to read the Software License Terms
carefully.

Turning off the power

The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Sleep Mode.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.
1. If you have entered data, either save it to the hard disk drive or to other
2. Make sure all disk/disc activity has stopped before removing the
Downloaded from LpManual.com Manuals
User's Manual
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section
up for the first time
Volume cannot be adjusted during Windows Setup.
Power button
storage media.
CD/DVD or floppy diskette.
for more information.
Figure 1-5 Turning on the power
Getting Started
Monitoring of power condition
Starting
1-7