Connecting A Pc; Connecting The Power Cord - Audiovox LCD1900 B Owner's Manual

CONNECTIONS

CONNECTING A PC

Connect the 15-pin D-SUB PC/VGA connector from
your computer to the 15-pin D-SUB PC/VGA input
on this unit using a monitor cable (not included).
Connect a stereo audio cable (not included) to
the PC AUDIO IN jack on the bottom of this unit,
and the other end to the AUDIO OUT jack on your
computer's sound card.
CONNECT THE POWER CORD
• Connect the AC power cord into a wall outlet.
• Press the STANDBY/ON button on the top of unit
or remote control to turn on the unit.
Note:
• Be sure the AC power cord is disconnected and
all functions are off before making connections.
• Make sure that all the components are connected
correctly.
• To prevent electrical shock, match wide blade
of plug to wide slot of wall outlet, then fully
insert.
• When you are not going to use the unit for a long
period of time, disconnect the power cord.
PVS31195_ib_AUD_eng_1-25.pmd
17
17
To AC outlet
28/12/2006, 14:25