Table of Contents
Advertisement
++L7300A_AU.book Page 77 Wednesday, June 5, 2013 3:36 PM
System Information and Reset
TV
System Information
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc.
a
In the Get Help menu, press
System Information.
b
Press OK to display the System Information.
System Information
TOSHIBA
2013
Jan 19 2013
Software Version : xxxxxxxx
MBOOT Version : xxxxxxxx
AVERAGE
CH 25
WEAK
STRONG
AVERAGE
CH 33
WEAK
STRONG
AVERAGE
CH 67
WEAK
STRONG
c
For information about the signal quality of a
particular multiplex, press
multiplex.
d
Press OK for a screen showing detailed technical
information about the selected multiplex.
Reset TV
Selecting Reset TV will reset all TV settings, including
saved channels, to their original factory values.
a
In the Installation menu, press
Reset TV.
b
Press OK to select. A screen will appear warning
that all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup
and perform an auto tune. (See "Quick Setup"
section on page 16.)
PC Settings
Connect the PC (as shown in the 'Connecting a computer'
a
B
b
/
to select
b
c
GOOD
GOOD
d
GOOD
B
b
/
to select that
B
b
/
to select
The Clock Phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
a
b
c
77
CONTROLS AND FEATURES
Horizontal and Vertical Position
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
B
b
Press
and
/
to highlight Picture icon.
c
B
b
Press
and
/
to select Display Settings and
press OK.
B
b
Press
/
to select PC Setting and press OK.
< Display Settings
Auto Format
4:3 Stretch
Picture Position
PC Settings
B
b
Press
/
to select an option and press
adjust the settings.
< PC Settings
Horizontal Position
Vertical Position
Clock Phase
Sampling Clock
Reset
Clock Phase
picture blur.
In the Display Settings menu, press
select PC Settings and press OK.
B
b
Press
/
to select Clock Phase.
C
c
Press
/
to adjust until the picture clears and
press OK.
On
Off
C
c
/
to
0
0
0
0
B
b
/
to
Advertisement
Table of Contents
