Hard Disk Drive - Panasonic CF-28 Series Reference Manual

Hard Disk Drive

To Change Your Hard Disk Drive, Contact Panasonic Technical Support
Tab A
Hook
Connector
CAUTION
To change your hard disk drive, contact Panasonic Technical Support.
Be sure to back up all impor tant data before the change.
You can erase the data before changing the hard disk drive.
( "Hard Disk Data Erase Utility")
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
Be careful when replacing the hard disk drive. The hard disk drive is extremely
sensitive to shock. In addition, static electricity could later affect some internal
components.
Inserting/Removing the Hard Disk Drive
1
Power off your computer
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor and remove the second battery pack if one
is inserted.
2
Tab B
Remove the cover
3
Removing the hard disk drive
Inserting the hard disk drive
4
Put the cover back into place
(
( page
Slide the hooks of the hard disk drive toward the inside.
Pull the tab A and release the hard disk drive from the connector.
Pull the tab B up and gently lift the hard disk drive.
Insert the hard disk drive as shown in the figure.
Push the base part of the tab A and firmly connect the hard disk
drive to the connector.
Slide the hooks of the hard disk drive toward the outside.
Close the tab A.
"Starting Up/Shutting Down")
30)
( page 31)
51