Panasonic CF-28 Series Reference Manual page 21

Security Measures
Setting the Supervisor Password
1
Run the Setup Utility
2
Using either
3
Using either
then press Enter
4
<Only when the Supervisor Password has been set>
Enter your password at the [Enter Current Password] and then
press Enter
5
Enter your password at the [Enter New Password] and then
press Enter
To disable the Supervisor Password
Press only Enter
NOTE
Your password will not be displayed on the screen.
Limit your password to seven characters. Note that there is no distinction
between upper and lower case letters.
Only the alphabet keys or number keys can be used. Note that the space
bar and function keys cannot be used.
6
Re-enter your password at the [Confirm New Password] and
then press Enter
To disable the Supervisor Password
Press only Enter
7
At the [Setup Notice], press Enter
8
Press F10 and then select [Yes], then press Enter
CAUTION
Do not input your password while holding down on Shift or
Use only the upper horizontal row of numeric keys to input your password.
Do not forget your password. If your Supervisor Password is forgotten you will
be unable to use your computer. Contact Panasonic Technical Support.
When running the Setup Utility, do not leave your computer even for a shor t
time, as the possibility exists for the password to be set/changed by another
person.
(enabling, changing, disabling)
( page 52)
or , select [Security]
or , select [Set Supervisor Password] and
21
Ctrl .