Advertisement
Quick Setup Guide
Speco Technologies DS Series DVRs
PTZ Camera Setup
• Connect the RS-485 cables of PTZ camera to the
RS-485 port on the rear panel.
•
In the SETUP menu, select the DEVICE tab and click
on CONTROLLER & PTZ.
• Set the channel, name, speed and ID on the PTZ setup
screen.
• Right click on the PTZ channel and click on PTZ from
the Sub Menu.
Network Setup
• Select the NETWORK tab.
• For DHCP, set the Network Type for DHCP and exit
from the menu. The IP address, Subnet Mask, Gateway
and DNS settings are retrieved from network servers.
DHCP is dynamic and the settings will change from
time to time.
• For Static, set the Network Type for Static. Enter the
IP address, Subnet Mask, Gateway and DNS. Obtain this
information from the network service provider.
• The Client Access must be ON for the DVR to be
accessed remotely.
• Enable/disable DDNS for free DDNS name server.
12-059
Connect the DVR via Web-Browser Viewer
Setup Requirements
• Make sure PC is connected to the Internet.
• Make sure DVR is already setup following the Network
Setup steps.
Internet Settings
• Start Internet Explorer; go to 'Tools' → 'Internet
Options' → 'Security' tab.
• Select 'Trusted sites' and click 'Sites' to specify its
security setting.
•
in this zone". Enter the IP address of the DVR in this
• In the Security Level area, click 'Custom Level'. Under
'ActiveX controls and plug-ins', set all items to 'Enable'
or 'Prompt'.
• Click 'OK' to accept the settings and close the 'Security
Settings' screen.
Obtain Network Information of the DVR
• Obtain IP address from System Information from the
Sub Menu.
• In the SETUP menu, select the SYSTEM tab and enable
CLIENT ACCESS.
• In the SETUP menu, select the NETWORK tab and
click on NETWORK PORT. Obtain the network and
web port number.
• Start Internet Explorer and enter the IP address and port
of the DVR.
- For example: http:// [ip address] : [port] →
http://192.168.80.6:80
• The ActiveX controls and plug-ins dialog will be
prompted for installation.
• Install the plug-ins.
• Click on 'Connect' and enter the username and
password of the DVR.
- The default usernames and passwords are
admin / 1111 and user / 1111.
W:420mm*H:297mm
Mobile View Software
The D16DS provides mobile surveillance
software for both the iPhone and the Android
.
®
™
iPhone
®
• Search for 'Speco Player' in the Apple App Store
and install the app.
• Select the ADD menu and enter site information.
Click ADD to save the site information.
• Select the saved site from "Devices"
• Select a channel(s) to view.
• Select Playback/Live then click CONNECT
Android
™
• Search for 'Speco Player' in the Android Market and
install the app.
• Select the ADD menu and enter site information.
Click ADD to save the site information.
• Select the saved site from "Devices" for network
connection.
• Select a channel and select Live view or Playback.
• Click START button.
Connect the DVR via SpecoTech
Multi-Client Viewer Software
SpecoTech Multi-Client Viewer Software is a multiple
site monitoring client software that allows streaming of
video and audio, and transmission of alarm signals from
the DVRs over the network. The SpecoTech Multi-Client
can display up to 16 DVRs and supports dual monitors.
PTZ camera control is also supported by this software.
By attaching a microphone and speaker system to
devices on site, the user may make bi-directional audio
communication over the network.
Refer to the complete manual for more information.
The SpecoTech Multi-Client Viewer Software and
manual are included on the CD.
200 New Highway
Amityville, NY 11701
1-800-645-5516
www.specotech.com
Rev. 11/06/2012
Advertisement
