Sanyo PLC-WXU700A Owner's Manual page 328

Commands on the menu bar
When the Network Capture 5 icon on the menu bar is clicked, the popup menu will appear. It provides
according to the operating modes as shown in the table below.
Network Capture activating
Parameter set up...
Window show..
Version information..
Shut down
Menu during Real time capturing
One-shot executing
Start real time capture
One-shot capture
Terminate capture
Window show..
Version information..
Shut down
Items
Start real time / Terminate capture...... Starts / Terminates the real time capturing. ( p.91) The screen image of the computer
One-shot capture............................... Transfers the one-shot screen image of the computer.
Select capture object*.......................... Sets to display the capture window selection dialog.
Parameter set up ............................... Sets the communication parameter between the computer and projector. For further
Window show.................................... Displays the application window on the screen.
Version information ........................... Displays the version of this software.
Shut down......................................... Quits the Network Capture 5 application.
Real time capture executing
One-shot capture
Terminate capture
Window show..
Version information..
Shut down
Description
is projected on the screen in real time.
* This menu will appear when "Select capturing object" is checked on the parameter
setting. (p.90)
information, see item "Parameter set up" on the next page.
About Network Capture function
89