Sanyo PLC-WXU700 Owner's Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. Think GAIA PLC-WXU700
  6. Owner's manual

Sanyo PLC-WXU700 Owner's Manual

Hide thumbs Also See for PLC-WXU700:
Table of Contents

Advertisement

Quick Links

Download this manual
The
trusted
dependable
most
,
name
projector lamp
in
sales.
http://www.myprojectorlamps.com
http://www.myprojectorlamps.ca
http://www.myprojectorlamps.eu
The following projector manual has not been modified or altered in any way.

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PLC-WXU700

Summary of Contents for Sanyo PLC-WXU700

  • Page 1 trusted dependable most name projector lamp sales. http://www.myprojectorlamps.com http://www.myprojectorlamps.ca http://www.myprojectorlamps.eu The following projector manual has not been modified or altered in any way.
  • Page 2 Multimedia Projector Network Supported Wireless LAN □ IEEE802.11b/g/n PLC-WXU700 MODEL Wired LAN □ 100-Base-TX/10-Base-T Memory Viewer USB Memory Viewer □ * Refer to the owner’s manuals below for details about network and memory viewer function. Network Set-up and Operation ■ Memory viewer function ■ Owner’s Manual...

  • Page 3: Features And Design

    Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ - You can project an image on a computer as well as Compact Design operate and manage the projector via network. This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to - This projector corresponds to "Connect to a Network use. Projector" function that is the standard equipment for Windows Vista. ♦ Capable of 360-degree Projection - The projector has the movie files transmission This projector is capable of 360-degree projection. function that can play movie files transmitted from a *Some restriction required, see page 7. computer to the projector. This function enables to playback movies very smoothly. This projector also ♦ Simple Computer System Setting corresponds to IEEE802.11n(Draft2.0). The projector has the Multi-scan system to conform to - This projector is capable of the wireless LAN simple almost all computer output signals quickly (p.32). Up to setting function by attaching the supplied USB WUXGA resolution can be accepted. memory to a computer. ♦...

  • Page 4: Table Of Contents

    Table of Contents Input Source Selection Features and Design . . . . . . . . . . . . . . . . . . . (Computer 2:RGB) Table of Contents .

  • Page 5: To The Owner

    To the Owner Before installing and operating this projector, read this Safety Precaution manual thoroughly. This projector provides many convenient features and WARNING: ● THIS APPARATUS MUST BE EARTHED. functions. Operating the projector properly enables ● TO REDUCE THE RISK OF FIRE OR you to manage those features and maintains it in good ELECTRIC SHOCK, DO NOT EXPOSE THIS condition for many years to come.

  • Page 6: Safety Instructions

    Safety Instructions All the safety and operating instructions should be read Do not install the projector near the ventilation duct of before the product is operated. air-conditioning equipment. Read all of the instructions given here and retain them This projector should be operated only from the type for later use. Unplug this projector from AC power supply of power source indicated on the marking label. If you before cleaning. Do not use liquid or aerosol cleaners.

  • Page 7: Air Circulation

    Safety Instructions Air Circulation Moving the Projector Openings in the cabinet are provided for ventilation. To When moving the projector, replace the Lens Cap and ensure reliable operation of the product and to protect it retract adjustable feet to prevent damage to the lens from overheating, these openings must not be blocked and cabinet. or covered. When the projector is not in use for an extended period, put it into the supplied carrying case with the lens side CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions CAUTION should be taken.
  • Page 8 Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture upward, downward or backward, perpendicular to the plane of the screen as shown in the figure below. 140º Bottom Front Bottom Front 50º 50º Downward Upward Upward Downward (Usual) 90º 40º 40º 180 º 0º Be sure to set the Lamp control in High and the Fan control in On 3 in the setting menu when using the projector inclined at between +40 degrees to +140 degrees to the horizontal plane at altitudes between 0 and approximately 1,600 meters above sea level. Be sure to set the Fan control in On 2 when using the projector at higher altitudes than the altitudes described above, regardless of the installation position of the projector. (p.61). Positioning Precautions Avoid positioning the projector as described below when installing. 10˚...

  • Page 9: Compliance

    – R eorient or relocate the receiving antenna. – I ncrease the separation between the equipment and receiver. – C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. – C onsult the dealer or an experienced radio/TV technician for help. Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-WXU700 Trade Name : Sanyo Responsible party : SANYO FISHER COMPANY Address : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818)998-7322 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

  • Page 10: Part Names And Functions

    Part Names and Functions Front Infrared Remote Receiver ① ② WIRELESS Indicator ③ Focus Ring 　 ④ Projection Lens ⑤ Zoom Lever ⑥ Lens Cap CAUTION Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑧ ⑦ Top Controls and Indicators ⑧...

  • Page 11: Rear Terminal

    Part Names and Functions Rear Terminal ⑤ ⑥ ① ② ③ ④ ⑦ ⑬ ⑫ ⑪ ⑩ ⑨ ⑧ ① R/C jACK ⑧ USB Connector (Series A) Connect the USB menory (refer to the owner’s When using the wired remote control, connect manual “Network Set-up and Operation”). the wired remote control to this jack with a remote control cable (not supplied). ⑨ S-VIDEO IN Connect the S-VIDEO output signal from video ② USB Connector (Series B) equipment to this jack (p.18).

  • Page 12: Top Control

    Part Names and Functions Top Control ⑩ ⑥ ⑨ ⑤ ④ ⑧ ⑦ ③ ② ① ① SELECT button ⑥ WARNING indicator – E xecute the selected item (p.24). – L ights red when the projector detects an abnormal – E xpand or compress the image in the Digital zoom condition. mode (p.39). – B links red when the internal temperature of the projector exceeds the operating range (pp.64, 75). ② POINT ▲▼◄► (VOLUME +/–) buttons ⑦ KEySTONE button – S elect an item or adjust the value in the On-Screen...

  • Page 13: Remote Control

    Part Names and Functions Remote Control ⑤ LASER LIGHT window A laser beam is emitted from here (p.14). ⑥ HDMI button Select the HDMI input source. (pp.28,41) ① ⑦ COMPUTER button Select the COMPUTER input source. (pp.30-31, 41) ③ ⑤ ② ④ ⑧ INFO . button Operate the information function. (p.63) ⑨ K EySTONE button Correct keystone distortion. (pp.26, 49) ⑩ Point ▲▼◄► ( VOLUME + / – ) buttons –Select an item or adjust the value in the On-Screen Menu. (p.24) ㉙...

  • Page 14: Remote Control Battery Installation

    Part Names and Functions Remote Control Battery Installation Open the battery Install new batteries Replace the compartment lid. into the compartment. compartment lid. Press the lid Two AAA size batteries downward and slide it. For correct polarity (+ and –), be sure battery terminals are in contact with pins in compartment. To ensure safe operation, please observe the following precautions : ● Use two (2) AAA or LR03 type alkaline batteries. ● Always replace batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote control to moisture or heat. ● Do not drop the remote control. ● If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries. ● Risk of an explosion if battery is replaced by an incorrect type.

  • Page 15: Laser Pointer Function

    Part Names and Functions Laser Pointer Function This remote control emits a laser beam from the laser light window. Press the LASER button to activate the laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is pressed for more than one minute or if it is released, the laser light goes off. The laser emitted is a Class II laser. Do not look into the laser light window or point the laser beam at yourself or other people. The following is the caution label for the laser beam. CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Never look directly into the laser light window while a laser is emitted, otherwise eye damage may result. The caution label is put on the remote control. Signal Emission Indicator Laser Light Window Pointer Function You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image. Press and hold the MENU and the NO SHOW buttons for more than 5 seconds to activate the Pointer function. PRESENTATION POINTER (The Laser pointer has switched to the Pointer function.) button Press the LASER button on the remote control pointing MENU button toward the projector. The Spotlight or Pointer is NO SHOW button displayed on the screen with the LASER button lighting Press and hold the MENU green. Then move the Spotlight or Pointer with the and NO SHOW buttons for PRESENTATION POINTER button. If the LASER button more than 5 seconds. does not light green and continues to emit a laser beam, try the abovementioned procedure until the LASER button lights green.

  • Page 16: Wireless Mouse Operation

    Part Names and Functions Wireless Mouse Operation The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with a USB cable (not supplied). See “Connecting to a PRESENTATION POINTER Computer” on page 17. When the Pointer button function is used, the wireless mouse is not Move the pointer on the screen available. with this button. R-CLICK button When a USB cable is connected to the Act as right (click) mouse computer and the projector, turn on the button while the projector and a projector first, then the computer. If you turn computer are connected with a on the computer first, the wireless mouse USB cable. function may not operate correctly. PAGE ▲▼ buttons Scroll back and forth the pages on the screen when giving a presentation. L-CLICK button Act as left (click) mouse button while the projector and a computer are connected with a USB cable.

  • Page 17: Installation

    Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.  Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. 39.7'(12.1m) A : B = 49 : 1 (Inch Diagonal) 25.2'(7.7m) 300"(tele ) 300"(wide) 16.7'(5.1m) Max. Zoom Min. Zoom 12.5'(3.8m) 200" 8.2'(2.5m) 150" 3.3'(1.0m) 100" 40" (Center) Screen Size 40”...

  • Page 18: Connecting To A Computer

    Installation Connecting to a Computer Cables used for connection • VGA cables (Mini D-sub 15 pin) * • USB cable • Audio cables • HDMI-DVI cable (*One cable is supplied; other cables are not supplied with the projector.) Monitor Monitor Output / Output Audio Output Output Monitor Input External Audio Equipment USB cable VGA VGA HDMI-DVI cable cable cable Audio Input Audio cable (stereo) USB COMPUTER IN 1 COMPUTER IN 2 / HDMI COMPONENT MONITOR OUT This terminal is switchable. Set up Audio cable the terminal as (stereo) COMPUTER IN 2 or...

  • Page 19: Connecting To Video Equipment

    Installation Connecting to Video Equipment Cables used for connection • Video and Audio cable (RCA x 3) • S-video cable • Audio cable (Cables are not supplied with the projector. ) External Audio Equipment Video and Audio Output Audio Input (Video) S-video Output S-video cable Video and Audio cable Audio cable (stereo) AUDIO OUT (stereo) VIDEO AUDIO IN S-video  Note: Unplug the power cords of When the AUDIO OUT is plugged-in, the projector's built- both the projector and external in speaker is not available. equipment from the AC outlet before connecting cables.

  • Page 20: Connecting To Component Video Equipment

    Installation Connecting to Component Video Equipment Cables used for connection • Audio cables • Scart-VGA cable • Component cable • HDMI cable • Component-VGA cable (Cables are not supplied with this projector.) Audio RGB Scart 21- Component Video Output Output pin Output (Y, Pb/Cb, Pr/Cr) HDMI Output Component cable Scart-VGA Audio HDMI External Audio Equipment cable cable cable (stereo) Component- VGA cable Audio Input HDMI COMPUTER IN 1/ COMPONENT IN COMPUTER 1 COMPONENT/ AUDIO IN Audio cable (stereo)

  • Page 21: Connecting The Ac Power Cord

    Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. Connect the AC power cord (supplied) to the projector. CAUTION The AC outlet must be near this equipment and must be easily accessible. Note: Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power. NOTE ON THE POWER CORD AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer. Projector side AC outlet side For the U .S .A . and Canada For Continental Europe For the U .K .

  • Page 22: Basic Operation

    Basic Operation Turning On the Projector Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap (see pages 9, 66). Press the ON/SYAND-BY button on the top control or on the remote control. The POWER indicator lights The preparation display will disappear green and the cooling fans start to operate. The after 30 seconds. preparation display appears on the screen and the Selected Input Source and Lamp Control count down starts. Video After the countdown, the input source that was selected Lamp control status the last time and the lamp control status icon (see page 58) appear on the screen. (See page 58 for Lamp control status.) Note: If there is no signal input when start on the projector, The Filter warning and Lamp replacement icons or the current signal is missed while operating the may appear on the screen depending on the projector, the Video/PC selection window will be usage state of the projector. displayed on the screen, please move the pointer to input source desired by pressing the Point ▲▼ buttons Video / PC selection window and press the SELECT button. And then follow the input signal guidance window to correct the signal and...
  • Page 23 Basic Operation Enter a PIN code Use the Point buttons to enter a number. Press the PIN Code Input Dialog Box ▲▼ Point button to fix the number and move the red frame ► pointer to the next box. The number changes to .

  • Page 24: Turning Off The Projector

    Basic Operation Turning Off the Projector Press the ON/STAND-BY button on the top control or on the remote control, and Power off? appears on the screen. Press the ON/STAND-BY button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running (You can select the level of fans’ quietness and speed. See "Fan" on page 61.). At this time, you can unplug the AC power cord even if Power off? disappears after 4 seconds. the fans are still running. When the projector has cooled down enough, the POWER indicator stops blinking and you can turn on the projector. TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS. Note: • When the On start function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.57). • The running speed of cooling fans is changed according to the temperature inside the projector. • Do not put the projector in a case before the projector is cooled enough. • If the WARNING indicator blinks or lights red, see "WARNING indicator" on page 64.

  • Page 25: How To Operate The On-Screen Menu

    Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Top Control Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment MENU button and setting procedure, refer to respective sections in this manual. POINT buttons (arrowhead) Press the MENU button on the top control or the remote control to display the On-Screen Menu. SELECT button Use the Point ▲▼ buttons to highlight or select a main menu item. Press the Point ►or the SELECT button Remote Control to access the submenu items. (The selected item is highlighted in orange.) POINT buttons (arrowhead) Use the Point ▲▼ buttons to select the desired submenu item and press the SELECT button to set or access the selected item. SELECT button Use the Point ▲▼◄► buttons to adjust the setting or MENU button switch between each option and press the SELECT button to activate it and return to the submenu.

  • Page 26: Menu Bar

    Basic Operation Menu Bar For detailed functions of each menu, see “Menu Tree” on pages 73-74. Main Menu Sub-Menu            Input Used to select an input source from Computer 1, Computer , HDMI, Video, S-video or Network (pp.30-31,40-41).  PC adjust Select Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust the parameters to match with the PC input signal format (p.32-35).  Image select For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard and image 1 - 4 (p.36).

  • Page 27: Zoom And Focus Adjustment

    Basic Operation Zoom and Focus Adjustment Rotate the Zoom Lever to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. Zoom Lever Auto Setup Function Focus Ring Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu by just pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. Refer to page 48 for the setting of the Auto setup Top Control function. AUTO SETUP/CANCEL button Note: • Auto Keystone corrects vertical distortion only; it does POINT ▲▼buttons not correct horizontal distortion. • Auto Keystone cannot work when Ceiling feature is set to On in the Setting menu (p.53). • Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion Remote Control cannot be corrected properly by pressing the AUTO SETUP/CANCEL or AUTO SET/CANCEL button, adjust manually by pressing the KEYSTONE button on the KEySTONE button remote control or selecting Keystone in the Setting menu (p.49).

  • Page 28: Sound Adjustment

    Basic Operation Sound Adjustment Top Control Direct Operation VOLUME+/- buttons Volume Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Remote Control Mute VOLUME- button Press the MUTE button on the remote control to select On to temporarily turn off the sound. To turn the sound back VOLUME+ button on, press the MUTE button again to select Off or press the VOLUME +/– buttons. The Mute function is also effective for the AUDIO OUT jack. Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Sound. Press the MUTE button Point ► or the SELECT button to access the submenu Approximate level items. of the volume. Volume Dialog Box Use the Point ▲▼ buttons to select the desired submenu item and press the SELECT button to access the selected item.

  • Page 29: Remote Control Operation

    Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. HDMI/COMPUTER/VIDEO/NETWORK button Remote Control Press the HDMI, COMPUTER, VIDEO or NETWORK button on the remote control to select the input source. See pages HDMI button VIDEO button 30-31, 40-41 for details. COMPUTER Refer to the owner’s manual of “Network Set-up and button NETWORK Operation” for details about the network input. button INFO . button FREEZE button Press the FREEZE button on the remote control to freeze POINT ▲▼buttons the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. FREEZE button INFO . button D .ZOOM+/- Display the input source information: Input, H-sync freq ., buttons V-sync freq ., Screen, Language, Lamp status, Lamp...
  • Page 30 Basic Operation NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as User in the Logo selection (see page 50), the screen changes each time you press the NO SHOW button as follows. No show disappears after 4 seconds. black out → the captured image → normal → • • • • • P-TIMER button Press the P-TIMER button on the remote control. The P-Timer display 00:00 appears on the screen and the countdown starts (00:00–59:59). To stop the countdown, press the P-TIMER button. To cancel P-Timer display the P-Timer function, press the P-TIMER button again. IMAGE button Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 36, 43 for details. NO SHOW button P-TIMER button SCREEN button IMAGE button Select the screen size (See pages 38-39, 46 for details). SCREEN button ...

  • Page 31: Computer Input

    Computer Input Input Source Selection (Computer 1: RGB / Component / RGB(Scart) ) Direct Operation Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. INPUT button Top Control Remote Control Computer 1 COMPUTER button  Computer 1 Computer  HDMI  Computer  Video S-video Network...

  • Page 32: Input Source Selection (Computer 2:Rgb)

    Computer Input Input Source Selection (Computer : RGB) Direct Operation Choose Computer  by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. INPUT button Top Control Remote Control Computer 1 COMPUTER button  Computer  Computer 1 HDMI  Computer  Video S-video Network  COMPUTER  can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.

  • Page 33: Computer System Selection

    Computer Input Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, UXGA or WUXGA with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 76-77) One of the following messages may appear when: The projector cannot recognize the connected PC System Menu Auto signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.34-35). There is no signal input from the computer. ----- Check the connection between your computer and the projector. (See “Troubleshooting” on pp.69-72.) The preset system is manually adjusted in the Mode 1 The PC System Menu PC adjust Menu. The adjusted data can be Selected system is stored in Mode 1-5 (pp.34-35). displayed. PC Systems provided in this projector is chosen. SVGA 1 The projector chooses a proper system provided in the projector and displays it.

  • Page 34: Auto Pc Adjustment

    Computer Input Auto PC adjustment Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V positions to conform to your computer. Menu Operation PC adjust Menu Auto PC adj . Press the MENU button to display the On-Screen Menu. Use the Point buttons to select PC adjust ▲▼ and then press the Point the SELECT button. ► Use the Point buttons to select Auto PC adj . and ▲▼ then press the SELECT button. To store adjustment parameters The adjusted parameters from the Auto PC adjustment can ▲▼ buttons Use Point...

  • Page 35: Manual Pc Adjustment

    Computer Input Manual PC adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. Press the MENU button to display the On-Screen Menu. PC adjust Menu Use the Point buttons to select PC adjust and then ▲▼ press the Point or the SELECT button. ► Use the Point buttons to select the desired item ▲▼ and then press the SELECT button to display the adjustment dialog box. Use the Point ◄► buttons to adjust the setting value. Fine sync Use the Point buttons to adjust the value, eliminating a ◄► flicker from the image displayed (from 0 to 31). Total dots Use the Point buttons to adjust the number of total dots ◄► in one horizontal period to match your PC image. Horizontal Use the Point buttons to adjust the horizontal picture ◄►...
  • Page 36 Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select yes. All adjustments will return to their previous figures. Mode free Mode free To clear the stored data, select Mode free and then press the Point or the SELECT button. Move the highlight to the ► mode that you want to clear and then press the SELECT button. Store To store the adjusted data, select Store and then press the Point or the SELECT button. Move the highlight to one of ► the Modes 1 to 5 in which you want to store, and then press the SELECT button. This mode has stored parameters. Values of Total dots, Horizontal, Vertical, Display area H and Display area V. Vacant Store Store store? Note: • Display area (H/V) cannot be selected when 480i, 575i, Press MENU button Press SELECT button to 480p, 575p, 70p, 1035i or 1080i is selected in the PC...

  • Page 37: Image Mode Selection

    Computer Input Image Mode Selection Direct Operation Remote Control IMAGE button Select the desired image mode among Dynamic, Standard, Real, Blackboard (Green), Colorboard, Image 1, Image , Dynamic Image 3 and Image 4 by pressing the IMAGE button on the remote control. Standard Real IMAGE button Blackboard (Green) Colorboard Image 1 Menu Operation Image  Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Image select and ▲▼...

  • Page 38: Image Adjustment

    Computer Input Image Adjustment Press the MENU button to display the On-Screen Image Adjust Menu Menu. Use the Point buttons to select Image ▲▼ ► the SELECT adjust and then press the Point button. Use the Point buttons select the desired item ▲▼ and then press the SELECT button to display the adjustment dialog box. Use the Point buttons to ◄► adjust the setting value. Contrast Press the Point button to decrease the contrast; press the ◄ Point button to increase the contrast (from 0 to 63). ► Selected Image mode Brightness Press the Point button to decrease the brightness; press ◄ the Point button to increase the brightness (from 0 to 63). ► Color temp . Use the Point buttons to select the desired Color temp.

  • Page 39: Screen Size Adjustment

    Computer Input Store To store the adjusted data, select Store and press the Point button. Use the Point buttons to select ► the SELECT ▲▼ one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image (1–4) in the Image Mode Selection on page 36. A confirmation box appears and Screen Size Adjustment then select yes. This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Screen Menu Menu. Use the Point buttons to select Screen and ▲▼ then press the Point button. ► or the SELECT Use the Point buttons select the desired item and ▲▼ then press the SELECT button . Normal Provide the image to fit the screen size. True Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector enters to the panning mode automatically. Use the Point buttons to pan the image. When adjusted, the ▲▼◄►...
  • Page 40 Computer Input Custom Adjust the screen scale and position manually with this function. Press the Point ►button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust. Scale H/V .. Adjust the Horizontal/Vertical screen scale. H&V .... When set to On, the aspect ratio is fixed. Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio.

  • Page 41: Video Input

    Video Input Input Source Selection (Video, S-video) INPUT button Direct Operation Top Control Choose Video or S-video by pressing the INPUT button on Computer 1 the top control or the VIDEO button on the remote control.  Computer  HDMI Remote Control Video VIDEO button Video S-video S-video Network  COMPUTER  can not be selected when using the COMPUTER IN 2/MONITOR OUT terminal as MONITOR OUT output. Menu Operation Press the MENU button to display the On-Screen Input Menu Menu. Use the Point buttons to select Input and ▲▼...

  • Page 42: Input Source Selection (Component, Rgb Scart 21-Pin,Hdmi)

    Video Input Input Source Selection (Component, RGB Scart 1-pin, HDMI) Direct Operation Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control; choose HDMI by pressing the INPUT button on the top control or press the HDMI button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below. INPUT button Top Control Remote Control Computer 1 HDMI button HDMI ...

  • Page 43: Video System Selection

    Video Input Video System Selection Press the MENU button to display the On-Screen AV System Menu (Video or S-video) Menu. Use the Point buttons to select Input and ▲▼ then press the Point or the SELECT button. ► HDMI Use the Point buttons to select Video , S-video ▲▼ Video S-video or Computer 1(Component) and then press the Network Wired 1 SELECT button. Use the Point buttons to select System and then ▲▼ press the Point or SELECT button. Use the Point ► ▲ buttons to select the desired system and then press ▼ SELECT button. Video or S-video Video Auto...

  • Page 44: Image Mode Selection

    Video Input Image Mode Selection Direct Operation IMAGE button Remote Control Select the desired image mode among Dynamic, Standard, Dynamic Cinema, Blackboard (Green), Colorboard, Image 1, Image , Image 3 and Image 4 by pressing the IMAGE Standard button on the remote control. Cinema Blackboard (Green) IMAGE button Colorboard Menu Operation Image 1 Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Image select and ▲▼ Image  then press the Point ► or the SELECT button. Use the Point buttons to select the desired item ▲▼...

  • Page 45: Image Adjustment

    Video Input Image Adjustment Press the MENU button to display the On-Screen Image adjust Menu Menu. Use the Point buttons to select Image ▲▼ or the SELECT ► adjust and then press the Point button. Use the Point buttons select the desired item ▲▼ and then press the SELECT button to display the adjustment dialog box. Use the Point buttons to ◄► adjust the setting value. Reset Contrast Store Press the Point button to decrease the contrast; press the ◄ Point button to increase the contrast (from 0 to 63). ► Selected Image mode Brightness Press the Point button to decrease the brightness; press ◄ the Point button to increase the brightness (from 0 to 63). ► Color Press the Point button decrease the intensity of the color;...
  • Page 46 Video Input Sharpness Press the Point button to decrease the sharpness of the ◄ image; press the Point button to increase the sharpness ► of the image (from 0 to 15). Gamma Use the Point buttons to adjust the gamma value to ◄► obtain a better balance of contrast (from 0 to 15). Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off ..Disabled. L1 ..Lower reduction. L ..Higher reduction. Progressive An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off ..Disabled. L1 ..For an active picture. L ..For a still picture. Film ..For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the Point or the SELECT button. A confirmation box appears and ►...

  • Page 47: Screen Size Adjustment

    Video Input Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Screen Menu Menu. Use the Point buttons to select Screen and ▲▼ then press the Point or SELECT button ► Use the Point buttons select the desired item and ▲▼ then press the SELECT button. Normal Provide the image to fit the screen size while maintaining the aspect ratio of input signal. Full Provide the full screen image. Zoom Pan the horizontal direction of the image and cut the vertical direction of the image to fit the screen size (16:9). Only for 4:3 video aspect ratio signals. Wide Provide the image at the 16:9 wide screen ratio. Natural wide Modify the 4:3 aspect ratio image to fit the screen size(16:9 aspect ratio) by stretching the image to make it look natural. Custom Adjust the screen scale and position manually with this function. Press the Point ► button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust. Scale H/V ..

  • Page 48: Setting

    Setting Setting This projector has a Setting menu that allows you to set up Setting Menu the other various functions described below. Press the MENU button to display the On-Screen Menu. Press the Point buttons to select Setting ▲▼ and press the Point or the SELECT button to access ► the submenu items. Use the Point buttons to select the desired item ▲▼ HDMI setup Terminal Computer 2 and then press the Point or the SELECT button to ► Pointer access the selected item. Standby mode Use the Point ▲▼ buttons to select the desired item and then press the SELECT button. Language The language used in the On-Screen Menu is available in Language English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Russian, Chinese, Korean, japanese and Thai.
  • Page 49 Setting Auto setup Auto setup This function enables Input search, Auto Keystone correction and Auto PC adjustment by pressing the AUTO SETUP/ CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. Settings for those functions can be altered as follows: Input search This function detects the input signal automatically. When HDMI setup Terminal Computer 2 a signal is found, the search will stop. Use the Point ▲▼ Pointer buttons to select one of the following options. Standby mode Off ..Input search will not work. On1 ..Input search works under the following situation. – When pressing the AUTO SETUP/CANCEL button on the top control. – When pressing the AUTO SET/CANCEL button on the remote control. On ..Input search works under the following situation. – When turning on the projector by pressing the ON/STAND-BY button on the top control or the remote control. – When pressing the AUTO SET/CANCEL button on the remote control. – When pressing the AUTO SETUP/CANCEL button on the top control. – When the current input signal is cut off.* If the No show or Freeze function is active, cancel it to activate the Input search. It is also unavailable when On- Screen menu is displayed.
  • Page 50 Setting Keystone This function is used to store or reset the keystone Keystone correction when the AC power cord is unplugged. Store .. Keep the keystone correction even when the AC power cord is unplugged. Reset .. Release the keystone correction when the AC power cord is unplugged. HDMI setup To correct keystone distortion, press the SELECT button. Terminal Computer 2 Pointer ▲▼ Keystone appears on the screen. Use the Point Standby mode buttons to correct keystone distortion (p.26). Background Select the background screen for when no input signal is detected. Press the Point buttons to switch between ▲▼ each option. Blue . . . Blue colored background. User . . . The image you captured. Black .
  • Page 51 Setting Logo (Logo and Logo PIN code lock settings) Logo select This function allows you to customize the screen logo with Logo select, capture, Logo PIN code lock and Logo PIN code change functions. Note: W hen On is selected in the Logo PIN code lock function, HDMI setup Logo select, capture and Logo PIN code change Terminal Computer 2 cannot be selected. Pointer Standby mode Logo select This function decides on the starting-up display from among following options.
  • Page 52 Setting Capture This function enables you to capture an image being Capture projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select yes to capture the projected image. After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector or when you press the NO SHOW button (see page 29). To cancel the capture function, select yes in the "Quit?" confirmation box. Note: • Before capturing an image, select Standard in the Image Select Menu to capture a proper image (pp.36, 43). • A signal from a computer can be captured up to WXGA (1280 x800). A signal from video equipment can be captured except for 720p, 1035i and 1080i. • When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. • When Logo PIN code lock is set to On, capture cannot be selected. • When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing. • When there is no captured image or it is interrupted while capturing an image, User cannot be selected, you can only switch between Default and Off. Logo PIN code lock Logo PIN code lock This function prevents an unauthorized person from changing the screen logo.
  • Page 53 Setting Enter a Logo PIN code Enter a Logo PIN code Use the Point buttons to enter a number. Press the ▲▼ Point button to fix the number and move the red frame ► pointer to the next box. The number changes to . If  you fixed an incorrect number, use the Point button to ◄ After a correct Logo PIN code move the pointer to the number you want to correct, and is entered, the following dialog then enter the correct number. box appears. Repeat this step to complete entering a four-digit Change the Logo PIN code lock setting number.
  • Page 54 Setting Ceiling Ceiling When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear Rear When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen. HDMI setup HDMI setup This function is only used for HDMI input source.
  • Page 55 Setting Pointer Pointer You can emphasize a part of the projected image with this function. Use the Point ▲▼ buttons to choose Spotlight (Large, Middle or Small) , Arrow, Finger or Dot and press the SELECT button. See "Pointer Function" on page 14. Arrow Standby mode This function is available when operating the projector via network. Normal .. Supply the power to the network function even after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off. Eco .... Select Eco when you do not use the projector via network. The projector’s network function will stop when turning off the projector. Refer to the owner’s manual of “Network Set-up and Operation”. Note: • Factory default is Eco. • When selecting Normal, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.
  • Page 56 Setting Picture in Picture This function is used to project two videos simultaneously Picture in Picture by placing a separate small sub screen within the main screen. (Picture in Picture combinations provided in this projector are shown on pages 78.) Only the sound on the main picture is heard, the sound on the sub picture cannot be heard.( In P in P, the big picture is main picture, and the small one is sub picture; in P by P, the left picture is main picture, and the right one is sub picture.) Mode ..P in P : The sub picture in the main picture. P by P: The sub picture by the main picture. Off : Exit the Picture in Picture menu. Subpicture size . . . Select the subpicture display size. Subpicture can be changed between Large, Small and Middle. Subpicture position. . Set a position for subpicture.This function is used to set Subpicture position as follows: the top left→ the bottom left →...
  • Page 57 Setting Power management For reducing power consumption as well as maintaining Power management the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Timer left before Lamp is off. Ready .... When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed. Shut down .. When the lamp has been fully cooled down, the power will be turned off. Off ....... Power management function is off. Timer .... If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Use the Point buttons to set the Timer(1~30min). ▲▼ Note: Factory default is Ready: 5 min.
  • Page 58 Setting On start When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. Note: Be sure to turn off the projector properly (see "Turning Off the Projector" on page 23). If the projector is turned off in the incorrect sequence, the On start function does not work properly. Closed caption Closed caption is a printed version of the program sound or Closed Caption other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC, CC3 or CC4. If the closed caption is not clear, you can change the text from Color to White. Note: The Closed Caption is available only under the situation below. • When the input signal is NTSC of composite and S-video, and the system is set according to the signal or set on Auto. • The system must be set on NTSC or Auto in Video System Selection. (p.42) • The icon of Closed caption is displayed in gray while it is not available. • The Closed caption is unavailable when On-Screen menu and P-Timer are displayed, and Picture in Picture is active. Press the Point ▲▼ buttons to select Off, CC1, CC, CC3 or CC4, and then Press the SELECT button.
  • Page 59 Setting Lamp control This function allows you to change brightness of the screen. Auto ... The brightness according to the input signal (between High and Eco mode). High ... Brighter than the Normal mode. Normal .. Normal brightness Eco .... Lower brightness reduces the lamp power consumption and extends the lamp life. Note: Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the lamp is stabilized. Remote control The eight different remote control codes (Code 1-Code 8) Remote control are assigned to the projector; the factory-set, initial code (Code 1) and the other seven codes (Code  to Code 8). The same code should set on both the projector and the remote control. For example, operating the projector in Code 7, the remote control code also must be switched to Code 7. To change the code for the projector Select a remote control code in this Setting Menu.
  • Page 60 Setting Key lock Security (Key lock and PIN code lock) This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation. Key lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons.. Unlocked.. Lock the operation of the top control. To unlock, use the remote control.. Lock the operation of the remote control. To unlock, use the top control. If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off ... Unlocked. On1 .. Enter the PIN code every time turning on PIN code lock the projector.
  • Page 61 Setting Enter a PIN code Use the Point buttons to enter a number. Press the Enter a PIN code ▲▼ Point button to fix the number and move the red frame ► pointer to the next box. The number changes to . If  you fixed an incorrect number, use the Point button to ◄ move the pointer to the number you want to correct, and then enter the correct number. Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, PIN code and the number ( ) will turn red for a moment. Enter the  correct PIN code all over again. Change the PIN code lock setting Use the Point buttons to select Off, On1 or On.
  • Page 62 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.23). L1 ..Normal operation L ..Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector down. Fan control Choose the running speed of cooling fans from the following options according to the ground elevation under which you Fan Control Setting use the projector. Off..Normal speed. Set this function to Off when using the projector in non-high altitude environment. 140º On 1... Faster than Off mode. Select this mode when using 50º 50º the projector in high altitudes (about 1,200 meters or more above the sea level) where the fans have 90º 40º 40º less cooling effect. 180 º 0º On ..Faster than On 1 mode. Select this mode when using the projector in higher altitudes than above where the fans have lesser cooling effect.
  • Page 63 Setting Filter counter This function is used to set a frequency for the filter Filter counter cleaning. When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select Reset and set the timer. The Filter warning icon will not turn off until the filter counter is reset. For details about resetting the timer, refer to "Resetting the Filter Counter" on page 65. Fig .1 Filter warning icon Press the SELECT button to select Timer and then use the Point buttons to set the timer. ▲▼ Select from (Off/100H/ 00H/ 300H) depending Filter warning icon appears on the screen at a set time. on the use environment. Note: This icon also appears at turning on. Note: The Filter warning icon (Fig.1) will not appear when the Display function is set to Off (p.49), during “Freeze”(p.28), or "No show" (p.29). Factory default Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.

  • Page 64: Information

    Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control to display the Remote Control Information Menu. INFO . button Menu Operation Press the Point buttons to select Information. The ▲▼ Information Menu is displayed. See below for displayed information. Input The selected input source is displayed. Information Menu H-sync freq . The horizontal frequency of the input signal is displayed in KHz or - - - - - when no signal. V-sync freq . The vertical frequency of the input signal is displayed in Hz or - - - - - when no signal. Numbers of Hz doubles when during Interlace.

  • Page 65: Maintenance And Cleaning

    Maintenance and Cleaning WARNING indicator The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. The projector is shut down and the WARNING Top Control indicator is blinking red . When the temperature inside the projector reaches a WARNING blinking red certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the POWER ON/STAND-BY button. Note: The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking. Then check the matters below: – Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

  • Page 66: Cleaning The Filters

    Maintenance and Cleaning Cleaning the Filters Filter prevents dust from accumulating on the optical elements inside the projector. Should the filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a Filter warning icon appears on the screen, clean the filters immediately. Clean the filters by following the steps below. Turn off the projector, and unplug the AC power cord from the AC outlet. Turn the projector over and remove the filters by pulling the latches upward. Gently clean the filters by using a brush or rinse it softly. When rinsing the filters, dry they well. Replace the filters properly. Make sure that the filters are fully inserted to the projector. CAUTION Filters Do not operate the projector with the filters Pull up and remove. removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air vents. Doing so may result in malfunction of the projector. RECOMMENDATION We recommend avoiding dusty/smoky environments when you operate the projector . Usage in these environments may cause poor image quality .

  • Page 67: Attaching The Lens Cap

    Maintenance and Cleaning Lens Cap Attaching the Lens Cap When moving the projector or while it is not in use, replace the lens cap. Thread the string through the hole on the lens cap and then tie a knot in the string to secure it in place. To pass the other end of the string into the hole on the top of the projector and pull at it. String for the lens cap Secure it to the hole Hole with a screw. Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner or use a lens cleaning paper or commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners,...

  • Page 68: Lamp Replacement

    Screw Close the lamp cover and secure the screw. Connect the AC power cord to the projector and turn on the projector. Reset the lamp counter . See “Resetting the Lamp Counter” on the next page. Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No . of your projector : PLC-WXU700 ● Replacement Lamp Type No . : POA-LMP111 (Service Parts No . 610 333 9740)

  • Page 69: Resetting The Lamp Counter

    Maintenance and Cleaning Resetting the Lamp Counter Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP REPLACE indicator stops lighting and the Lamp replacement icon disappears. Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Setting and ▲▼ then press the Point button. ► or the SELECT Use the Point buttons to select Lamp counter ▲▼ and then press the SELECT button. Use the Point ▲▼ buttons to select Lamp counter reset and then press SELECT button. Lamp counter Reset? appears. Select yes to continue. Another confirmation dialog box appears, select yes to Lamp counter Reset? reset the Filter counter. appears. Select yes, then another  confirmation box appears. Note: Do not reset the Lamp counter without implementing Select yes again to reset lamp replacement. Be sure to reset the Lamp counter...

  • Page 70: Appendix

    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages 17-19. – Make sure all equipment is connected to AC outlet and the power is turned on. –...
  • Page 71 Appendix – Check the connection between your computer or video equipment No image and the projector. See pages 17-19. – See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer’s instruction manual for the setting. – It takes about 30 seconds to display an image after turning on the projector. See page 21. – C heck the Input signal, color system, video system or computer system mode. – Make sure the temperature is not out of the specified Operating Temperature ( 41˚F–95˚F [5˚C–35˚C]) – When No Show function is operating, the image cannot be displayed. Press the NO SHOW button or any other button on the remote control. – Check the audio cable connection from audio input source. No sound – Adjust the audio source. – Press the Volume + button. See page 27. – Press the Mute button. See page 27. – When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. – Is the image projected? You will hear the sound only when the image is projected. – Check the Input signal, color system, video system or computer The color is strange . system mode. – Make sure Blackboard is not selected on Image select menu. See pages 36, 43. Some displays are not seen during – Check the Display function. See page 49.
  • Page 72 Appendix – Check PC adjustment or Screen and adjust them. The image is distorted or runs off . See pages 34-35, 38-39 . PIN code dialog box appears at – PIN code lock is being set. Enter a PIN code ("134" or numbers start-up . you have set). See pages 22, 59-60. – Make sure your computer is connected to the projector with USB Page Up/Down function does not cable. See page 17. work . – Check cable connection between the projector and your computer. See page 17. – Check the batteries. The Remote Control does not work . – Make sure no obstruction is between the projector and remote control.
  • Page 73 Appendix WARNING : High voltages are used to operate this projector . Do not attempt to open the cabinet . If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service. This symbol on the nameplate The CE Mark is a Directive conformity means the product is Listed mark of the European Community (EC). by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against Pixelworks ICs used. risk of fire, casualty and electrical hazards.

  • Page 74: Menu Tree

    Appendix Menu Tree Computer Input/HDMI Input/Video Input Input Input Computer 1 RGB Component RGB (Scart) Computer 2 HDMI Video S-video Network Sound Volume 0-63 Sound Mute On/Off Computer Input Dynamic Image Select Standard SVGA 1 System Real Mode 1 Blackboard (Green) Mode 2 Colorboard Red/Blue/Yellow/Green - - - - Image 1 Image 2 * Systems displayed in the System Menu vary Image 3...
  • Page 75 Appendix HDMI Input / Video Input Setting Auto Language 17 languages provided. Setting System 1080i Menu position 1035i Auto setup Input search Off/On1/On2 720p Auto PC adj. 575p On/Off 480p Auto Keystone 575i Auto 480i Manual Auto System Keystone Store/Reset Background Blue/User/Black SECAM Display On/Countdown off/Off NTSC Logo Logo select NTSC 4.43 User PAL-M...

  • Page 76: Indicators And Projector Condition

    Appendix Indicators and Projector Condition Check the indicators for projector condition. Indicators Projector Condition LAMP WARNING POWER REPLACE red/green yellow The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/STAND-BY button  to turn on the projector. The projector is operating normally.  The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling  is completed and the POWER indicator stops blinking. The projector is in the Power management mode.  The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER  indicator stops blinking and the projector can be turned on. (The WARNING indicator keeps blinking.) The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING  indicator stops blinking. Check and clean the filters. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power ...

  • Page 77: Compatible Computer Specifications

    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal. When selecting these modes, PC adjustment can be limited. When the input signal is Analog , refer to the chart below. ON-SCREEN H-Freq . V-Freq . ON-SCREEN H-Freq . V-Freq . RESOLUTION RESOLUTION DISPLAy (KHz) (Hz) DISPLAy (KHz) (Hz) VGA 1 640 x 480 31.47 59.88 SXGA 1 1152 x 864 64.20 70.40 VGA 2 720 x 400 31.47 70.09 SXGA 2 1280 x 1024 62.50 58.60 VGA 3...
  • Page 78 Appendix When the input signal is digital from HDMI terminal, refer to the chart below. ON-SCREEN H-Freq . V-Freq . ON-SCREEN H-Freq . V-Freq . RESOLUTION RESOLUTION DISPLAy (KHz) (Hz) DISPLAy (KHz) (Hz) D-480p 640 x 480 31.47 59.88 D-SXGA1 1280 x 1024 63.98 60.02 D-480p 720 x 480 ---- 59.94 D-SXGA2 1280 x 1024 60.276 58.069 D-480p 720 x 480 ---- 60.00 D-SXGA3 1280 x 1024 31.65...

  • Page 79: List Of Picture In Picture

    Appendix List of Picture in Picture : Picture in Picture combinations are enabled - : Picture in Picture combinations are disabled  Note: • W hen the input signal(s) is/are incompatible, X mark will be displayed on the Main/Sub picture. • D epending on the frequency or signal type of PC/AV input, the display resolution may be lowered or images may not be displayed on the Main/Sub picture. 　　<Display resolution is lowered when;> • I nputting PC analog signals: Between 100-140 MHz 　　<Images are not displayed and X mark appears when;> • I nputting PC analog signals: More than 140MHz • I nputting PC digital signals: More than 100MHz • I nputting AV digital signals: 1080p 　　<Picture in Picture is disabled when;> • I nputting signal formats: SXGA20, WUXGA 1, WUXGA 2, WSXGA+ 1, WXGA+2, UXGA 1, UXGA 2, UXGA 3, UXGA4, D-1080p...

  • Page 80: Technical Specifications

    Appendix Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.16" x 3.09" x 10.14" (334.2 x 78.4 x 257.5mm) (Not including protrusions) Net Weight 7.94 lbs (3.6 kg) Feet Adjustment 0˚ to 8.9˚ Panel Resolution LCD Panel System 0.74" TFT Active Matrix type, 3 panels Panel Resolution 1,280 x 800 dots Number of Pixels 3,072,000 (1,280 x 800 x 3 panels) Signal Compatibility Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N High Definition TV Signal 480i, 480p, 575i, 575p, 720p, 1035i, and 1080i Scanning Frequency H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz Optical Information Projection Image Size (Diagonal) Adjustable from 40” to 300” Throw Distance 3.3' (1.0m) - 39.7' (12.1m) Projection Lens F1.7–2.5 lens with f=19.2 mm–30.2 mm with manual zoom and focus Projection Lamp 275 W Interface Video Input Jack RCA Type x 1 S-video Input Jack Mini DIN 4 pin x 1...

  • Page 81: Optional Parts

    Appendix Accessories Owner’s Manual (CD-ROM) Quick Reference Guide Safety Manual AC Power Cord Remote Control and Batteries VGA Cable Lens Cap with String PIN Code Label Network Application (CD-ROM) Soft Carrying Case USB thumb drive for Auto Capture Case (for USB thumb drive) Hook and Loop Fastener ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. Optional Parts The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dealer. Model No. : POA-CA-COMPVGA COMPONENT~VGA Cable : POA-CA-SCART SCART~VGA Cable : KA-MC-DB10 VGA-Cable (10 m)

  • Page 82: Pj Link Notice

    Appendix Pj Link Notice This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see page 51 on the owner’s manual of “Network Set-up and Operation.” Projector Input PJLink Input Parameter Computer 2 (Analog) RGB 1 HDMI(Digital) DIGITAL 1 RGB 2 Computer 1 Component RGB 3 RGB (Scart) RGB 4 Video VIDEO 2 Video S-video VIDEO 3 NETWORK NETWORK 1 PJLink is a registered trademark of JBMIA and pending trademark in some countries.

  • Page 83: Configurations Of Terminals

    Appendix Configurations of Terminals COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) Red (R/Cr) Input/Output +5V Power/----- Green (G/Y) Input/Output Ground (Vert.sync.) Blue (B/Cb) Input/Output Ground/----- DDC Data /----- ----- Ground (Horiz.sync.) Horiz. sync. Input/Output (Composite H/V sync.) Ground (Red) Vert. sync. Ground (Green) DDC Clock /----- Ground (Blue) HDMI (19 Pin Type A) TMDS Data 2+ Input Ground (TMDS Clock) 1 3 5 7 9 11 13 15 17 19...

  • Page 84: Pin Code Number Memo

    Appendix PIN Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No . Factory default set No: 1 2 3 4* Logo PIN Code Lock No . Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory set number will be invalid. While the projector is locked with the PIN code. Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. USB Thumb Drive Case While the USB thumb drive is not in use, put it in the USB Thumb Drive Case to prevent lose USB theumb drive. Use hook and loop fastener, the USB Thumb Drive Case will be a fixed place on the projector. → USB thumb drive case Hook and loop fastener (supplied) (supplied)

  • Page 85: Dimensions

    Appendix Dimensions Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) 13.16(334.2) 3.17(80.5) 5.08(129.0) 5.20(132.0) 5.08(129.0) 4.43(112.5)
  • Page 86 KY7AC SANyO Electric Co ., Ltd .

Table of Contents