Sanyo PLC-WXU700A Owner's Manual page 279

Chapter 5 Wireless LAN configurations
Use of security type "WPA-PSK", "WPA2-PSK"
1. Use the Point
WPA-PSK(TKIP)
configuration screen
2. Use the Point
appears. Enter the PSK key by using the Point buttons. If the input PSK key has an error, the PSK key is
indicated in red.
3. Use the Point
configuration, and return to the "Network setting" in the Network menu.
Available PSK key characters
ASCII code ......8 to 63 digits
Hex code.........64 digits
* Security "WPA-PSK" and "WPA2-PSK" modes are not available when the "AdHoc" network type is selected.
* When you set the PSK keys with 64 digits, the projector checks whether all of the entered PSK keys are in Hex code or
not. If any of the ASCII code is included in the entered PSK keys, the entered PSK keys are indicated in red as error.
40
buttons to select "WPA-PSK" security type.
buttons to select the key field and press SELECT button. The PSK key entry screen
buttons to select "Set" and press SELECT button to complete the network