Sanyo PLC-WXU700A Owner's Manual page 321

Chapter 7 Controlling the projector
Start/stop the multi control
To start or stop controlling the multi-projectors, click Multi
control setting menu and select ON or OFF.
Multi control setting
OFF ..........Stops multi control function
ON............Starts multi control function. The multi control
82
menu will appear when ON is set. These items of
menu are linked to the main menu.
The multi controllable menus are "Power & Status", "PC
adjustment", "Control", "Setting", "E-mail setting", "Timer", and
"SNMP setting". Click each menu and perform setting and
adjustment.
The word "MULTI CONTROL" appears on the each control page while
the multi control is operating.
This shows the multi control is
operating now.
Switches on and off the
multi-control function