Table of Contents
Advertisement
Operating Your Camera
SYNC : In areas where the supply is at 60Hz(NTSC),
50Hz(PAL) frequency, you can synchronize the
output phase of multiple cameras using the
power synchronization function (Line-Lock)
without using a synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
Notes
• W hen using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type
synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
• When using RJ-45 Connector, you can't use the L/L type synchronization.
MOTION DET :
This product has a feature that allows you to observe
movement of objects in 8 different areas on the screen,
and the words 'MOTION DETECTED' appear on the
screen when movement is detected.
You can monitor activity more efficient.
... 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicates'MOTION DET'.
... 2) ... S et up the mode using the Function Setup switch.
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS
: Determines which of the 4 vertices of each MD area is to be used.
- XPOS
: Determines the coordinate of the horizontal axis for SEL POS.
- YPOS
: Determines the coordinate of the vertical axis for SEL POS.
- FILL→SET
: Fills in a selected MD area. The color of filling is sequentially selected
32
COLOR CCD CAMERA
User Guide
as brown, orange, blue, cyan, green, yellow, magenta and red.
- RETURN
: Select this to save the MOTION DET menu settings and return to the
SPECIAL menu.
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY AREA SETUP
1.AREA
2.MODE
3.MASK COLOR
4.MASK TONE
5.TOP
6.BOTTOM
7.LEFT
8.RIGHT
9.RETURN
1) ... When the SPECIAL menu screen is displayed, press the Function Setup switch so that
the arrow indicates 'PRIVACY'.
... ... 2) ... Set up the mode using the Function Setup switch.
- AREA
: You can select up to 12 PRIVACY areas.
- MODE
: Determines whether to use the area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
- RETURN
: Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the camera
through an external control device.
... 1) ... When the SPECIAL menu screen is displayed, press the Function Setup switch so that
the arrow indicates 'COMM ADJ'.
... ... 2) ... Set up the mode using the Function Setup switch.
COLOR CCD CAMERA
AREA1
OFF
GREEN
1
39
79
13
52
33
User Guide
Advertisement
Table of Contents
