Table of Contents
Advertisement
Operating Your Camera
Manual : Select Manual Lens
3. Each Lens mode has sub menu items as listed below.
- Brightness (DC, Manual) : Adjusts the video brightness.
- Level (VIDEO)
: Adjusts the level of video iris signals; the higher the level,
the brighter the video looks
- FOCUS ADJ (DC, VIDEO) : To adjust the DC and VIDEO lens focus correctly, you must
activate the Focus Settings mode under each lens menu.
Activate the Focus Settings mode, adjust the lens focus, and
then deactivate the settings mode. (The VIDEO lens requires
an extra step: go to the sub menu of the Focus Settings
mode and change the shutter speed to adjust the lens
brightness.)
- IRIS SPEED (DC)
: Adjusts the Iris control speed of the DC lens. If the control speed
is too slow or fast, please use this menu to adjust the speed.
Notes
• W hen using VIDEO lens, adjust the lens VR explained below first and set the focus using
'FOCUS ADJ' menu.
• I f color rolling occurs when using a DC lens, set Shutter to A.FLK.
• S ome lenses may not work properly, depending on the setting of the BRIGHTNESS LEVEL.
• When Using a Video-Type Auto Iris Lens
A djust the ALC adjustment terminal on the lens appropriately. In general, set it to AV
❶...... ...
(Average).
... I t may not work properly depending on the installed lens. Set the Level VR of the lens
2......
to the optimal value.
... S et AGC to OFF and adjust the Lens VR to an appropriate brightness.
3......
A djust the Lens VR, adjust the BRIGHTNESS, and then check if the screen brightness
4......
changes properly. Otherwise, adjust the Lens VR again.
20
COLOR CCD CAMERA
User Guide
EXPOSURE
MAIN MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function
Setup switch so that the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
SHUTTER : You can select the shutter.
- A.FLK
: Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
- ESC
: Select this to control the shutter speed automatically. If ESC is selected,
the shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually. (1/60(1/50) ~ 1/120,000)
- ---
: Shutter speed is fixed at 1/60sec(1/50sec).
Notes
• When you use a DC lens, set the shutter mode to A.FLK if color rolling occurs.
• W hen the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the
picture may become unstable if the camera faces a bright fluorescent light. Therefore,
take care when choosing the installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
• A n item with the - - - icon is unavailable due to function settings.
COLOR CCD CAMERA
DC
ATW
25
ESC
HIGH
OFF
21
User Guide
Advertisement
Table of Contents
