Replacement Instructions - Cornelius FCB Pinnacle Installation Instructions Manual

Replacement Instructions

1. Remove the top and rear panels.
2. Remove the two screws from the top of the
electrical box and swing it out to the side.
Secure the electrical box in the open position
with tape.
3. Attach gauges and initiate refrigerant removal.
4. While charge is being removed perform following procedure:
A. Remove wire connectors to pulse valve, 2 plugs. Set the wires aside.
B. Remove wire connectors to hot gas valves, 2 plugs. Set the wires aside.
© 2007-2013, IMI Cornelius Inc.
Step 1
Figure 3.
- 3 -
Pinnacle Hot Gas Valve Replacement Installation Instructions
Figure 2.
Step 2
Publication Number: 629091023INS