Checking Transaxle Fluid Level; Checking Movable Parts - Kubota ZG124E-AU Operator's Manual

BChecking Transaxle Fluid Level
1. Park the machine on a flat surface, lower the
implement to the ground and shut off the engine and
remove the key.
2. Check to see that the oil level lies at the "FULL COLD"
line while the machine is at ambient temperature.
If the level is too low, add the new oil to the prescribed
level into the tank.
(See "LUBRICANTS AND FUEL" in "MAINTENANCE"
section.)
(1) Transaxle fluid tank
A If oil level is low, do not run engine.
Add the new oil to the prescribed level into the tank.
A Do not overfill the tank.
(A) Oil level is acceptable
at this line.
BChecking Movable Parts
If any of the movable parts, such as levers and pedals, is
not smoothly moved because of rust or anything sticky, do
not attempt to force it into motion.
In the above case, remove the rust or the sticky object,
and apply oil or grease on the relevant spot.
Otherwise, the machine may get damaged.
PERIODIC SERVICE 35