3-3: Turn the rear cover ring clockwise, which was attached to the bayonet mount. Then stop at the position as shown in Fig.3-1.
3-4: Fix the following 3 locations of the rear cover ring with the instant adhesive.
3-5: Turn the bayonet mount over. Reinforce the following 3 locations with the adhesive to attach the bayonet mount and rear
cover ring firmly.
3-6: Attach the mount rotation stopper screw at the appropriate position.
Additional page
Fig. 3
Fig. 4
- L42-14 ・ AF-S 17-55/2.8G -
INC
JAA78851-R.3617.A
Fig. 3-1
November. 4. 2004