Setting Up; What You Need; Charging The Battery - Sprint Treo 600 Manual

Setting Up

1

What You Need

You should have received all of the following components in the Treo box:
Hardware
• Treo handset
• AC charger
®
• USB HotSync cable
• headset
• slip case
Documentation
• Start Here to Activate (this book)
• Additional Tips & Shortcuts for Keyboard Navigation
Software
• Palm Desktop and synchronization software (on the CD in the Treo box)
Other
As you work through the instructions in this section, you'll also need the
following items:
• An electrical outlet
• The computer with which you will synchronize your personal data
2
2

Charging the Battery

You must charge your Treo fully before using it. It may not turn on at all when you
first remove it from the box.
1. Plug the AC charger into a wall outlet.
2. Connect the charger cable to the bottom of the Treo with the word UP facing
the same way as your Treo screen.
3. Wait for the LED to turn solid green. This may take up to 3 hours.
LED
Important Note: It is vital that you use only Sprint-approved AC adapter chargers. Use of
unauthorized accessories could damage your phone and invalidate your warranty.
3