b) External valves
i.
Replace integrated valve with plug-and-play replacement connector
Procedures:
1) Before connecting water supply to the PCG cassette. First remove the integrated valve using
spanner
2) Replace with plug-and-play connector (Fig. 18)
3) Connect the external valve directly onto the cassette.
ii.
Disable integrated valve functionality using valve cap
Procedures:
1) Remove integrated valve actuator by pressing on both sides. (Fig. 19)
2) Place the valve cap onto the valve body. (Fig. 20)
3) Connect the external valve directly onto the cassette.
HYDRONIC CASSETTE
Fig. 19
22
Fig. 18
Fig. 20