Adjustment
13
Adjusting the thread trimmer –900/93
.05
13
Adjusting the synchronizer
.05.01
13 - 10
Requirement
1. When the machine has stopped it should be positioned in b.d.c. needle bar.
2. After thread trimming the machine should be positioned in t.d.c. take-up lever.
1
2
Fig. 13 - 09
Slightly loosen screw 1 and adjust it in accordance with requirement 1.
Slightly loosen screw 2 and adjust it in accordance with requirement 2.
Only loosen screws 1 and 2, do not remove them completely!