Environmental Information - Toshiba e-studio 167 Operator's Manual For Copying Functions

Hide thumbs Also See for e-studio 167:
Table of Contents

Advertisement

Environmental Information

ENERGY STAR
Toshiba Tec Corporation, as a member of the ENERGY STAR Programme, confirms that this
product meets the ENERGY STAR Programme requirements.
The ENERGY STAR Programme aims at the promotion of the development and wider usage of
office equipment including energy-efficient computers in order to address environmental issues
such as global warming. Manufacturers that participate in this programme can attach the
ENERGY STAR logo to products after confirming that they meet the energy saving standards of
this programme. Also, these standards and logo are commonly used within the U.S. Environ-
mental Protection Agency (EPA) and participating countries.
Energy saving features
Energy saving features are provided in this product in order to reduce power consumption when
it is not being used.
Low power mode
The equipment automatically enters this mode when a specified period of time
ting at the time of shipment: 5 minutes) has passed since the last use.
appears on the LCD screen.
Sleep mode
The equipment automatically enters this mode when a specified period of time
ting at the time of shipment: e-STUDIO167/207: 20 minutes, e-STUDIO237: 30 minutes) has
passed since the last use.
*1 The period from the last use to the time the equipment enters the low power mode or the sleep mode
can be changed. See the following page for details:
P.127 "Timer Setting"
*2 In the sleep mode, the equipment starts warming itself up when print data are received, or when any but-
ton on the control panel is pressed. When the warm-up has been completed, the equipment goes into
the ready status and starts printing out the data.
*3 This message appears when the Network Printer Kit (optional) is installed, or when this equipment is
connected to a PC with a USB cable. If this equipment is stand-alone, the display on the LCD screen
goes off.
®
Programme
*2
"Sleep mode" appears on the LCD screen
*1
(the default set-
*2
"Saving energy"
*1
(the default set-
*3
.
Environmental Information
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 207E-studio 237

Table of Contents