Saeco Minuto Service Manual page 43

MINUTO
The user can change the page by pressing the STAND-BY button.
Page 0 is accessible only entering Test Mode from PowerOFF.
At the start up all loads are turned off.
ERROR: If machine model is different from TOP, change the interface. ERROR: If machine model is different from TOP, change the interface.
TEST MODE Level0
Pressing button ON/OFF
TEST MODE Level1
Pressing button ON/OFF
TEST MODE Level2
Pressing button ON/OFF
TEST MODE Level3
Pressing button ON/OFF
TEST MODE Level4
Pressing button ON/OFF
TEST MODE Level5
Firmware Software version Firmware Software version
Firmware version on the display. Firmware version on the display.
The machine model is shown ( TOP). The machine model is shown ( TOP).
The voltage of the main supply "230V/120V" The voltage of the main supply "230V/120V"
The frequency of the main supply is shown (50 or 60 Hz) The frequency of the main supply is shown (50 or 60 Hz)
Press STAND_BY " Press STAND_BY "
The machine passes to the Page 1 (KEYBOARD) The machine passes to the Page 1 (KEYBOARD)
ERROR: The page does not change; Check the interface
board and the fl at cable (JP21)
Pressing button ON/OFF
" to move to the next screen " to move to the next screen
05 TROUBLESHOOTING
Page
02
/ 46