Changing The Port Settings For Smartdevicemonitor For Client; Windows 98; Windows 2000 / Windows Nt 4.0; Windows Xp, Windows Server 2003 - Lanier GX3050 User Manual

Preparing for Printing

Changing the Port Settings for SmartDeviceMonitor for Client

Follow the procedure below to change the SmartDeviceMonitor for Client settings, such as TCP/IP timeout,
recovery/parallel printing, and printer groups.
If you via a print server connected to the printer are using the SmartDeviceMonitor port, Recovery Printing and Parallel Printing cannot be
used from the client.

Windows 98:

1. Open [Printers] window from [Start] menu.
2. In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click
[Properties].
3. Click the [Details] tab, and then click [Configure Port].
The [Port Configurarion] dialog box appears.

Windows 2000 / Windows NT 4.0:

1. Open [Printers] window from [Start] menu.
2. In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click
[Properties].
3. On the [Ports] tab, click [Configure Port].
The [Port Settings] dialog box appears.

Windows XP, Windows Server 2003:

1. On the [Start] menu, point to [Settings], and then click [Printers].
2. In the [Printers] window, click the icon of the printer you want to use. On the [File] menu, click
[Properties].
3. Click the [Details] tab, and then click [Configure Port].
The [Port Settings] dialog box appears.
For TCP/IP, timeout setting can be configured.
If no settings on the [Recovery/Parallel Printing] tab are available, follow the procedure below.
1. Click [Cancel] to close the [Port Configurarion] dialog box.
2. Start SmartDeviceMonitor for Client, and then right-click the SmartDeviceMonitor for Client icon on
the taskbar.
3. Click [Extended Features Settings], and then select the [Set Recovery/Parallel Printing for each port]
check box.
4. Click [OK] to close the [Extended Features Settings] dialog box.
User, proxy, and timeout settings can be configured for IPP.
141