Installing The Flywheel Magnet - Yamaha EK25BMH Service Manual

POWR
FLYWHEEL MAGNET
Remove:
• Flywheel magnet
Removing steps
(1) Remove the starter pulley
(2) Remove the flywheel magnet nut.
Flywheel holder
90890-06522
NOTE:
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel holder may
easily slip off of the flywheel magnet.
(3) Remove the flywheel magnet.
Flywheel puller
90890-06521
NOTE:
• The major load should be applied in the
direction of the arrows.
• Apply the load until the flywheel mag-
net comes off the tapered portion of the
crankshaft.
CAUTION:
To prevent damage to the engine or tools,
screw in the flywheel puller set-bolts
evenly and completely so that the puller
plate is parallel to the flywheel magnet.

INSTALLING THE FLYWHEEL MAGNET

Install:
• Flywheel magnet
Flywheel holder
90890-06522
NOTE:
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel holder may
easily slip off of the flywheel magnet.
5-11
E