Changing The Picture Quality On The Lcd Monitor - Panasonic SDR-S100 Operating Instructions Manual

Changing the picture quality on the LCD monitor

SETUP
POWER SAVE
BEEP SOUND
LCD AI
LCD SET
INITIAL SET
SETUP ENTER
≥ When [DYNAMIC] is set, the LCD
monitor is set to the
brightness optimally suited for the
particular scenes to be recorded. Crisp
and bright images will be displayed.
≥ The effect will vary depending on the
scene recorded.
In order to increase the brightness of the entire LCD monitor
≥ When the button is pressed again,
to the LCD monitor.
≥ This will not affect the images to be recorded.
≥ When the AC adaptor is used, [
brighter when the power is turned on.
2/3
NORMAL
DYNAMIC
EXIT
MENU
colour level
and
POWER LCD
[
] goes off, and the original brightness is restored
] appears automatically and the monitor becomes
Press the menu button, then use the
cursor button to select
[ SETUP]#[
[DYNAMIC] or [NORMAL]. (P27)
[DYNAMIC]
– :
The image on the LCD monitor becomes
clear and vivid.
– [NORMAL]:
Switches to the standard picture quality.
≥ This function is automatically set to
[DYNAMIC] when the brightness of the
LCD monitor is increased (when [
displayed) and cannot be set to
[NORMAL] independently.
≥ This will not affect the images to be
recorded.
Press the [POWER LCD] button.
[
] appears on the LCD monitor.
≥ If the [POWER LCD] button is pressed, the
entire LCD monitor will become approx. twice
as bright as the normal.
≥ LCD stands for Liquid Crystal Display, and in
this context refers to the LCD monitor.
(LCD AI)
LCD AI]#
] is
31
VQT0T60