Dpof Setting; This Is For Writing The Printing Data On - Panasonic SDR-S100 Operating Instructions Manual

DPOF setting

This is for writing the printing data on an SD card
You can write the data of pictures to be printed, number of copies, and other
information (DPOF data) onto the SD card.
¬ Rotate the mode dial to select
1
PLAY SETUP
PLAY MODE
LOCK
DPOF SET
SETUP ENTER
2
DPOF SET
SETUP ENTER
3
DPOF SET
SETUP ENTER
To complete the settings
Press the [MENU] button.
To return the total number of pictures to [0]
PLAY SETUP
PLAY MODE
LOCK
DPOF SET
SETUP ENTER
Press the menu button, then use the
cursor button to select
[
NO
[SET]. (P27)
SET
CANCEL ALL
EXIT
MENU
Press the cursor button up, down, left
or right to select a scene to be set,
then press the button in the centre.
The number of prints set to be in DPOF is
displayed.
Press the cursor button up or down to
select the number of prints, then
press the button in the centre.
≥ You can select from 0 to 999. (Selected
≥ The function can be cancelled by setting the
Press the menu button, then use the
cursor button to select
[
NO
[CANCEL ALL]. (P27)
SET
CANCEL ALL ≥ When the confirmation message appears, use
EXIT
MENU
.
PLAY SETUP]
number of pictures can be printed as you set
the number of prints with the printer
supporting DPOF.)
number of pictures to [0].
PLAY SETUP]#[
the cursor button to select [YES], then press
the button in the centre.
#
[ DPOF SET]
DPOF SET]#
#
67
VQT0T60