Touch Screen Calibration; Changing The Picture Quality On The Lcd Monitor; Viewfinder Adjustment - Panasonic HDC-TM350 Operating Instructions Manual

Touch screen calibration

Perform the touch screen calibration if a different
object to the one touched is selected.
1
Select the menu. (l 22)
[SETUP] # [CALIBRATION] # [YES]
≥ Touch [ENTER].
2
Touch [r] with the supplied
stylus pen and enter in
calibration.
≥ Touch the [i] in the order it is displayed.
(5 locations)
3
Touch [ENTER].
≥ Cal bration cannot be performed when the LCD
monitor is turned 180o.
Changing the picture quality
on the LCD monitor
≥ The Intelligent auto mode is set to off.
(l 36)
Select the menu. (l 22)
[SETUP] # [LCD AI] # [DYNAMIC] or
[NORMAL]
[DYNAMIC]:
The image on the LCD monitor becomes clear
and vivid. Optimum contrast and brightness are
set depending on the scenes recorded. Clear
and brilliant images are presented.
[NORMAL]:
Switches to the standard picture quality.
≥ When the [POWER LCD] is set to
it is set to [DYNAMIC], or when the [POWER
LCD] is set to or
-1
[NORMAL], and the setting cannot be
changed.

Viewfinder adjustment

∫ Adjusting the field of view
It adjusts the field of view to show the images on
the viewfinder clearly.
Adjust the focus by rotating the
eyepiece corrector dial.
≥ Extend the viewfinder and close the LCD
monitor to turn on the viewfinder.
or
+1 +2
A , it is set to
31
VQT2H62
,