Built-In Flash; Setting The Flash Mode; Red Eye Reduction Function - Panasonic SDR-S100 Operating Instructions Manual

Built-in flash

Use the built-in flash in order to record still pictures in dark places.
¬ Rotate the mode dial to select
1

Setting the flash mode

ADVANCE
FLASH
RED EYE
FLASH LEVEL
OIS
REC LAMP
SETUP ENTER
When the flash is not used
Close the flash by pressing it with your fingers until it clicks back into place.

Red eye reduction function

ADVANCE
FLASH
RED EYE
FLASH LEVEL
OIS
REC LAMP
SETUP ENTER
Slide the [OPENß] flash lever.
The flash rises.
≥ The flash will flash when the record button is
Press the menu button, then use the
1/2
cursor button to select
[
select the desired setting. (P27)
EXIT
MENU
≥ When [
Press the menu button, then use the
1/2
cursor button to select
[
OFF
ON
(P27)
The [
EXIT
MENU
≥ Red eye phenomenon may appear depending
.
pressed.
ADVANCE]>[ ß FLASH] and then
ß
– [ ]: Forced flash
ß
– [ A]: Auto
ß
A] is set, the ambient brightness is
automatically detected, and only when the
flash is judged necessary will it flash.
ADVANCE]>[
] indication appears.
on the recording conditions.
RED EYE]>[ON].
55
VQT0T60