Baxi windermere TF Installation And Servicing Instrucnions page 18

9.0 Annual Servicing – Page 18
Supplied By www.heating spares.co Tel. 0161 620 6677
9.4 Windermere
1. Unscrew the brass knob and open the door (Fig. 34).
2. Remove all the coals and manoeuvre the ceramic base
out of the stove and place carefully to one side (Fig. 35
& 36).
3. Undo the disconnecting union on the gas supply.
4. Pull the control knob off the tap and undo the screw
retaining the plate (Fig. 38).
5. Undo the brass locknut holding the tap to the mounting
bracket (Fig. 38).
6. Disconnect the two leads from the spillage monitoring
device (Fig. 39).
7. Carefully manoeuvre the burner/controls assembly out
of the stove (Fig. 40).