Table of Contents
Advertisement
9.0
Annual Servicing – page 16
Supplied By www.heating spares.co Tel. 0161 620 6677
9.1 Maintenance
IMPORTANT: It is possible that some soot may be
deposited on the coals after use. This is acceptable
providing it is not allowed to accumulate.
CAUTION: The coals are extremely fragile and must be
handled accordingly. To avoid soiling ones hands,
gloves should be worn and any inhalation of the dust
should be avoided. Keep the coals away from children at
all times. Never use coals other than those supplied or
Genuine Baxi Spare Parts. Never put additional coals on
the stove. Please read section 1.3 Important Information.
1.
Servicing should be carried out regularly by a
competent person in accordance with the relevant
regulations, to ensure the safe and correct operation of
the appliance.
2.
Before commencing any service or replacement of
parts, turn off the gas supply to the stove and ensure
that the stove is cold.
3.
After servicing, check for gas soundness.
4.
When ordering spare parts please quote appliance
name and serial number. These can be found on the
data badge which is located by removing the controls
cover (Fig. 25). The badge is behind the cover and
fixed to the burner.
5.
At least once a year check for debris in the catchment
area behind the stove (RF models) and in the flueway.
6.
If soot has accumulated in the flue or catchment area,
check to establish the cause. Rectify and clean flue or
chimney accordingly.
7.
The coals may be removed for cleaning. The coals are
delicate and should be handled carefully. Gently brush
with a soft brush to remove dust or deposits.
8.
Examine the coals for signs of cracking and replace if
necessary.
IMPORTANT: See coal layout procedure
(Section 5.0 Arranging the Coals) before attempting to
replace coals.
9.
Do not clean pilot jet or injectors using pins or wire.
Hide quick links:
Advertisement
Table of Contents
