Carry Handle - McCulloch MC1275 Owner's Manual

SCRUB PAD
NOTE: Scrub Pad connects to the Steam Jet Nozzle, not
the Main Nozzle.
1. Place Scrub Pad over tip of Steam Jet Nozzle, and firmly
press it on to Steam Jet Nozzle as far as possible (See
figure 4). This will help to prevent steam leakage.
2. To remove Scrub Pad, simply grip it firmly and pull it off of
Steam Jet Nozzle.

CARRY HANDLE

1. Insert Carry Handle into hole on top of
unit. Align Handle so that grip bracket
faces towards front of unit (See figure 5).
2. Use enclosed Screw Driver to tighten
screw found inside Carry Handle, until
secured to main unit.
ORDERING ACCESSORIES & PARTS
Replacement accessories and parts for your Multi-Use Steam Canister (model MC1275)
may be ordered through our Website:
www.mccullochsteam.com
You may also contact Consumer Service directly:
consumerservice@mccullochsteam.com or 1-800-711-6617
Assembling Your Multi-Use
Steam Canister
FIGURE 4
FIGURE 5
ENGLISH | 9