Extension Wands - McCulloch MC1275 Owner's Manual

STEAM MOPPING ACCESSORIES
WARNING: Do not try to connect accessories while unit is emitting steam.

EXTENSION WANDS

1. Select one of the Extension Wands. Insert end (A) of Wand into Main Nozzle (B). Align hole in
Wand with grey lock/release button on Nozzle.
2. Press down on grey lock/release button. While continuing to hold button down, slide Exten-
sion Wand onto Main Nozzle until button snaps through hole on Wand.
3. Slide remaining Extension Wand (C) onto end of assembled Wand (D), this time lining up rect-
angular hole of remaining Wand with grey lock/release button of first Wand. Press and hold
button, and firmly push second Wand onto end of first Wand until button snaps through hole.
Both Extension Wands should now be connected to the Main Nozzle.
B
MOP HEAD
1. Align Mop Head with open end of Extension Wand, so that rectangular hole in Mop Head
aligns with grey lock/release button on Wand.
2. Press down on grey lock/release button. While continuing to hold button down, slide Mop
Head onto Extension Wand (See figure 1-A). Press on firmly until button snaps through hole
(See figure 1-B).
NOTE: Do not use excessive force when mopping or using Extension Wands as this
may cause the Wands to break.
6 | ENGLISH
Assembling Your Multi-Use
Steam Canister
A
A
D
FIGURE 1
C
B