Land Pride Razor Pro ZRP44 Operator's Manual page 22

Section 3 Adjustments
6. Refer to Figure 3-17 & Figure 3-18. Loosen all nuts on
the deck lift threaded rods, and the hardware on the
adjuster (on the right front), until all the deck lift chains
are loose, and the deck is sitting tightly on all four
blocks
.
Deck Lift
Nut
threaded Rod
21076
Deck Level Adjustment
Figure 3-17
5/16" Bolt
Hardware
21056
Deck Level Adjustment
Figure 3-18
7. Refer to Figure 3-19. Loosen the two nuts on the front
of height indicator so that the foot pedal is free.
20 ZRP44 & ZRP52 Zero Turning Radius Mowers
Table of Contents
Nut
Chain
Jam Nut
Adjuster
356-117M
21057
Deck Level Adjustment Foot Pedal
Figure 3-19
8. Start the leveling process on the left front of the
mower.
9. Refer to Figure 3-20. Set the amount of threads
protruding on the deck lift rod from the lift block at
approximately 1"
.
Lift Block
Deck Lift Rod
1"
21075
Left Rod Protruding Threads
Figure 3-20
10. Jam both nuts against the lift block.
11. Push or pull on the deck lift foot pedal until the chain
on the left front just becomes tight, making sure that
the deck stays tight against the 3" block.
Land Pride
Foot Pedal
Nuts
1"
Deck Lift Assist
Springs
7/14/08