Add Host Groups - Fujitsu ETERNUS DX100 S3 Setup Manual

Chapter 5 Host Interface Management

5.5 Add Host Groups

5.5 Add Host Groups
This function creates new host groups and register member hosts.
This section uses FC host groups as an example to show how to create host groups.
An FC host group uses FC or FCoE as the interface type, and groups the hosts (HBAs), which access the same
LUN group. This function configures Host Affinity settings for each FC host group.
The number of host groups and hosts that can be registered
Model
ETERNUS DX100 S3
ETERNUS DX200 S3
ETERNUS DX500 S3
ETERNUS DX600 S3
ETERNUS DX200F
*1: The total number of host groups irrespective of the interface types.
*2: The total number of hosts irrespective of the interface types.
To assign an appropriate host response to a created host group, refer to "FUJITSU Storage ETERNUS DX
Configuration Guide -Server Connection-" for each OS type. The host response configures the operation mode
that is appropriate for the host. For details on the recommended patterns for host responses, refer to "Add
Host Response" in "ETERNUS Web GUI User's Guide (Settings)".
If an appropriate host response is not configured to the host group, the path may not be switched correctly or
the volume may not be recognized correctly.
Number of host
groups (*1) per
storage system
512
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
Number of hosts Number of hosts
(HBAs) (*2) per
storage system
1024
90
Number of hosts
(HBAs) (HBAs)
per CA port per host group
256 8
P2X0-1250-06ENZ0