Chapter 3 Initial Setup
3.2 Initial Setup 2
8
Proceed to [Set SNMP Agent Community].
The [Setup SNMP Agent Community] function must be used when using SNMPv1 or SNMPv2c in SNMP
communication between the SNMP Agent and SNMP Manager. The SNMP Agent Community setting is
not necessary when using SNMPv3 only.
8-1
Click the [Add] button.
Click the [Skip] button to proceed to the next screen without setting.
8-2
Specify the parameters.
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
45
P2X0-1250-06ENZ0