Chapter 5 Host Interface Management
5.2 Modify Port Parameters
2
Set the parameters for all of the selected ports.
The settings of port parameters vary depending on the port mode
77),
"When the port mode is "RA"" (page
■ When the port mode is "CA"
When the type is "1G iSCSI" or "10G iSCSI" and the port mode is "CA", specify the following items:
The main setting items are as follows.
●
Select Port
•
Port
●
General Information
•
iSCSI Settings
-
-
•
TCP/IP Settings
-
-
-
-
-
-
-
-
-
-
-
iSCSI Name
Alias Name
IP Version
IP Address
Subnet Mask
Gateway
IPv6 Link Local Address
IPv6 Connect IP Address
IPv6 Gateway
TCP Port No.
TCP Window Scale
VLAN ID
Jumbo Frame
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED
78), or
"When the port mode is "CA/RA"" (page
77
("When the port mode is "CA"" (page
80)).
P2X0-1250-06ENZ0