Inventory Of Contents; Feature; Set Up Guide; Battery Install - Oregon Scientific WS-1400 DRAFT Instruction Manual

1. Inventory of contents

1) Base station
2) One remote sensor with mounting bracket
3) Instruction manual

2. Feature

1) Wireless outdoor and indoor humidity (%RH)
2) Wireless outdoor and indoor temperature (°F or °C)
3) Records min. and max. humidity
4) Records min. and max. temperature
5) Barometric pressure 24-hour history graph (inHg or hPa)
6) Weather forecast tendency arrow
7) Forecast icons based on changing barometric pressure
8) Time and date by manual setting
9) DCF radio controlled time and date with manual setting (WH1170 )
10) Automatically updates for daylight saving time based onGermany DST system (WH1170)
11) 12 or 24-hour time display
12) Perpetual calendar
13) Time alarm with snooze
14) Can receive one sensor
15) LED backlight
16) Wall hanging or free standing
17) Included transmitter
18) Low battery indicator
19) Synchronized instant reception

3. Set up Guide

3.1 Battery install

Note: To avoid operating problems, please take note of battery polarity before/when inserting any
Alkaline Batteries (permanent damaged could be introduced by inserting the battery in wrong
direction). Use good quality Alkaline Batteries and avoid rechargeable batteries.
1) Insert two AAA batteries into the remote sensor
2) Insert three AA batteries into the weather station.
3) Wait 3 minutes or until the outdoor temperature is displayed in the weather station. Do not press any
keys before outdoor sensor data received .
4) Mount the units, ensuring that the receiver can still pick up the signal from the transmitter. To
measure outdoor temperature, place the transmitter outdoors. It will transmit the temperature from its
location.
Every time the remote sensor is powered up (for example after a change of batteries), a random security
code is transmitted and this code must be synchronized with the base station to receive weather data.
Thus if battery change happened on transmitter side, then the receiver must be power up again to
re-learn the transmitter.
After the remote sensor is powered up, the sensor will transmit weather data every 8s for 16 times. After
this learning period is over, then the transmitter will transmit every 48s.
- 2 -