Table of Contents
Advertisement
Land Pride
Introduction
Introduction
Land Pride welcomes you to the growing family of new
product owners.
This Disc Mower has been designed with care and built by
skilled workers using quality materials. Proper assembly,
maintenance, and safe operating practices will help you
get years of satisfactory use from the machine.
Application
The Land Pride Disc Mowers are designed and built to cut
hay, grass, and other cultivated forage crops on farms,
ranches, set-aside acres, and vast right-of-ways. They are
adapted for 540 rpm three-point hitch Category II offset
mounting and are Quick-Hitch adaptable. They are
compatible with 35 HP to 80 HP tractors equipped with live
or independent PTO's. The DM3605 has 5 discs and an
82" cutting width. The DM3606 has 6 discs and a 96"
cutting width and the DM3607 has 7 discs and a 112"
cutting width.
Land Pride Disc Mowers are designed to deliver good
cutting performance even in thick, tangled, and wet grass
conditions. Standard replaceable rock guards provide
cutter bar protection in stony conditions and will greatly
extend cutter bar life. A standard break-away latch will
release, allowing the cutter bar to swing back, if an
obstacle is hit.
Land Pride Disc Mowers are well suited for use in
agricultural regions where humidity and moisture
conditions are typically higher and the potential for crop
entanglement and tough ground conditions are present.
See "Features and Benefits", "Section 5" for additional
information.
Using This Manual
•
This Operator's Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator's or Parts Manual contact your
authorized dealer. Manuals can also be downloaded,
free-of-charge from our website at www.landpride.com
or printed from the Land Pride Service & Support Center
by your dealer.
Terminology
"Right" or "Left" as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
NOTE: A special point of information that the operator
must be aware of before continuing.
IMPORTANT: A special point of information related to
its preceding topic. Land Pride's intention is that this
information should be read and noted before
continuing.
5/5/08
Table of Contents
Owner Assistance
The Warranty Registration card should be filled out by the
dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the disc mower.
The parts on your disc mower have been specially
designed and should only be replaced with genuine Land
Pride parts. Therefore, should your disc mower require
replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and mod-
el number when ordering parts from your Land Pride deal-
er. Be sure to include your serial and model numbers in
correspondence also. Refer to Figure 1 for the location of
your serial number plate.
Further Assistance
Your dealer wants you to be satisfied with your new disc
mower. If for any reason you do not understand any part of
this manual or are not satisfied with the service received,
the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Serial Number Plate Location
Figure 1
Land Pride
Service Department
P.O. Box 5060
Salina, KS 67402-5060
DM36 Series Disc Mowers 327-045M
20775
7
Advertisement
Table of Contents
