Cleaning Or Replacing Gun Liner - Miller Millermatic 210 Owner's Manual

6-8. Cleaning Or Replacing Gun Liner

5/16 in
Y Disconnect gun from unit first.
Head Tube
Remove nozzle, contact tip, and
adapter.
Lay gun cable out straight
before installing new liner.
Blow out gun casing.
Return To Table Of Contents
Tools Needed:
5/16 in, 10 mm
10 mm
Remove liner.
To Reassemble Gun:
Install and tighten new liner.
Cut liner off 3/4 in (20 mm) (3/8 in
[9.5 mm] for aluminum) from head
tube.
Install adapter, contact tip, and
nozzle.
Ref. 800 797-C
OM-1325 Page 25